Actiontec electronic 802PSG user manual

Page 17

Actiontec 54 Mbps Wireless Multiport Print Server User Manual

19.The “Configure Your Adapter’s IP Address” window appears. Make sure “Automatically Obtain IP Settings (DHCP)” is active, then click Next.

20.The “Setup Status Summary” window appears. Make sure the settings are cor- rect, then click Save.

21.In the popup window that appears, click Yes.

22.Back in the Actiontec Print Server Manager window, click Reboot in the toolbar.

After the computer restarts, the Print Server is connected and configured. Next, go to “Configuring the Printer’s Settings” on the next page.

14

Image 17

Contents Wireless Multiport Print Server Table of Contents This page left intentionally blank Introduction1 Package ContentsSystem Requirements FeaturesPWR Light Getting to Know the Print ServerWlan Light Printer 1 LightPrinter 3 Light Power PortLAN Light P2, P3 PortsTechnical Support Reset ButtonLAN Port Technical SupportThis page left intentionally blank Connecting the Print Server Setting Up Print ServerTo configure the Print Server Configuring the Print ServerSetting Up the Print Server Page Setting Up the Print Server Page Setting Up the Print Server Page Configuring the Printer’s Settings Connecting the Printer Accessing the Print Server Manager Using the Print Server ManagerStatus MAC ID Print Server Name SetupDevice Info SMB Group Name Set User Name/PasswordSave/Cancel Dhcp Server Netware Server Queue Serviced by PrinterPolling Time Printer Type Zone NamePort Name Upgrade FirmwarePrinting Protocols Wireless Function Box. Click Next Scan for your local Wireless NetworkAssign Your Wireless Network Manually WEP Ascii DisableWEP HEX After configuring, click NextAfter selecting, click Next WPA shared keyLocation ContactWizard Using the Print Server Manager Page Refresh ReportSearch RebootTo access the Web Adminsitrator Using the Web AdministratorAccessing the Web Administrator Device Name Device SetupDisplays the Print Server’s device name Printer Server NameModel Type Wireless LAN StatusSystem Up Time MAC AddressPrinter SMB Page Setup Wizard Page Using the Web Administrator WPA- shared key WEPUsing the Web Administrator Page Using the Web Administrator System Tools Load DefaultUsing the Web Administrator This page left intentionally blank Welcome window appears. Click Next Accessing Printers From the NetworkPage Accessing Printers From the Network This page left intentionally blank While saving settings, a Save Timed Out error occurs TroubleshootingPrinter Server Utility does not detect the Print Server Printer prints strange or nonsensical charactersThis page left intentionally blank Specifications a Relative Humidity 80 % non-condensing Limited Warranty Year Using Internet Printer Protocol Page Appendix b Using Internet Printer Protocol This page left intentionally blank Glossary Access PointPage Ssid Page Class B Equipment Regulatory Compliance NoticesModifications All other names are the property of their respective owners Miscellaneous Legal NoticesLimited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty