Actiontec electronic 802PSG user manual Getting to Know the Print Server, PWR Light, Wlan Light

Page 6

Chapter 1 Introduction

Getting to Know the Print Server

This section contains a quick description of the Print Server’s external features.

Front Panel

The Print Server’s front panel features six lights (LEDs):

 

 

r

 

 

 

Printe

 

 

 

 

2

3

LAN

 

1

 

 

PWR

WLAN

 

 

 

 

 

 

 

PWR Light

The PWR (Power) light illuminates when the Print Server is powered on, and remains off (or dark) when no power is present.

WLAN Light

The WLAN light illuminates when the Print Server is connected wirelessly.

Printer 1 Light

The Printer 1 light flashes when printing to the printer connected to the P1 (par- allel) port of the Print Server.

Printer 2 Light

The Printer 2 light flashes when printing to the printer connected to the P2 (USB) port of the Print Server.

3

Image 6
Contents Wireless Multiport Print Server Table of Contents This page left intentionally blank Package Contents Introduction1Features System RequirementsWlan Light Getting to Know the Print ServerPWR Light Printer 1 LightLAN Light Power PortPrinter 3 Light P2, P3 PortsLAN Port Reset ButtonTechnical Support Technical SupportThis page left intentionally blank Setting Up Print Server Connecting the Print ServerConfiguring the Print Server To configure the Print ServerSetting Up the Print Server Page Setting Up the Print Server Page Setting Up the Print Server Page Configuring the Printer’s Settings Connecting the Printer Using the Print Server Manager Accessing the Print Server ManagerStatus MAC ID Setup Device InfoPrint Server Name Set User Name/Password Save/CancelSMB Group Name Dhcp Server Queue Serviced by Printer Polling TimeNetware Server Zone Name Printer TypeUpgrade Firmware Printing ProtocolsPort Name Wireless Function Scan for your local Wireless Network Assign Your Wireless Network ManuallyBox. Click Next Disable WEP AsciiAfter configuring, click Next WEP HEXWPA shared key After selecting, click NextContact LocationWizard Using the Print Server Manager Page Report RefreshReboot SearchUsing the Web Administrator Accessing the Web AdministratorTo access the Web Adminsitrator Displays the Print Server’s device name Device SetupDevice Name Printer Server NameSystem Up Time Wireless LAN StatusModel Type MAC AddressPrinter SMB Page Setup Wizard Page Using the Web Administrator WEP WPA- shared keyUsing the Web Administrator Page Using the Web Administrator Load Default System ToolsUsing the Web Administrator This page left intentionally blank Accessing Printers From the Network Welcome window appears. Click NextPage Accessing Printers From the Network This page left intentionally blank Printer Server Utility does not detect the Print Server TroubleshootingWhile saving settings, a Save Timed Out error occurs Printer prints strange or nonsensical charactersThis page left intentionally blank Specifications a Relative Humidity 80 % non-condensing Limited Warranty Year Using Internet Printer Protocol Page Appendix b Using Internet Printer Protocol This page left intentionally blank Access Point GlossaryPage Ssid Page Regulatory Compliance Notices ModificationsClass B Equipment Miscellaneous Legal Notices All other names are the property of their respective ownersLimited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty