Actiontec electronic 802PSG user manual Status

Page 21

Actiontec 54 Mbps Wireless Multiport Print Server User Manual

Doing so will generate the “Print Server Manager” window, as shown below.

In the left pane of the window is a graphical representation of the Print Server and the printers connected to it. At the bottom of the screen is an event monitor, which lists any actions performed while using the Print Server Manager. There are a series of icons in the tool bar across the top of the window: Status, Setup, Wizard, Report, Refresh, Reboot, and Search.

Status

To check the status of the Print Server, highlight it in the left pane, then click Status. This generates the “Status” screen in upper right pane of the Print Server Manager window, which displays information about the Print Server. None of these settings can be changed from here.

18

Image 21

Contents Wireless Multiport Print Server Table of Contents This page left intentionally blank Introduction1 Package ContentsSystem Requirements FeaturesPWR Light Getting to Know the Print ServerWlan Light Printer 1 LightPrinter 3 Light Power PortLAN Light P2, P3 PortsTechnical Support Reset ButtonLAN Port Technical SupportThis page left intentionally blank Connecting the Print Server Setting Up Print ServerTo configure the Print Server Configuring the Print ServerSetting Up the Print Server Page Setting Up the Print Server Page Setting Up the Print Server Page Configuring the Printer’s Settings Connecting the Printer Accessing the Print Server Manager Using the Print Server ManagerStatus MAC ID Setup Device InfoPrint Server Name Set User Name/Password Save/CancelSMB Group Name Dhcp Server Queue Serviced by Printer Polling TimeNetware Server Printer Type Zone NameUpgrade Firmware Printing ProtocolsPort Name Wireless Function Scan for your local Wireless Network Assign Your Wireless Network ManuallyBox. Click Next WEP Ascii DisableWEP HEX After configuring, click NextAfter selecting, click Next WPA shared keyLocation ContactWizard Using the Print Server Manager Page Refresh ReportSearch RebootUsing the Web Administrator Accessing the Web AdministratorTo access the Web Adminsitrator Device Name Device SetupDisplays the Print Server’s device name Printer Server NameModel Type Wireless LAN StatusSystem Up Time MAC AddressPrinter SMB Page Setup Wizard Page Using the Web Administrator WPA- shared key WEPUsing the Web Administrator Page Using the Web Administrator System Tools Load DefaultUsing the Web Administrator This page left intentionally blank Welcome window appears. Click Next Accessing Printers From the NetworkPage Accessing Printers From the Network This page left intentionally blank While saving settings, a Save Timed Out error occurs TroubleshootingPrinter Server Utility does not detect the Print Server Printer prints strange or nonsensical charactersThis page left intentionally blank Specifications a Relative Humidity 80 % non-condensing Limited Warranty Year Using Internet Printer Protocol Page Appendix b Using Internet Printer Protocol This page left intentionally blank Glossary Access PointPage Ssid Page Regulatory Compliance Notices ModificationsClass B Equipment All other names are the property of their respective owners Miscellaneous Legal NoticesLimited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty