Actiontec electronic 802PSG user manual

Page 13

Actiontec 54 Mbps Wireless Multiport Print Server User Manual

6.The “Print server list” window appears, and the Setup program locates the Print Server. If the Print Server does not appear in the “Choose Print Server” list box, make sure it is connected properly, then click Refresh. When the Print Server is located, click Next.

7.The “Name the print server” window appears. Enter a name for the Print Server in the “Alias Name” text box, then click Next.

8.The “Network protocol configuration” window appears. If needed, change any of the network settings. However, Actiontec recommends leaving the TCP/IP settings unchanged. Click Next.

10

Image 13

Contents Wireless Multiport Print Server Table of Contents This page left intentionally blank Introduction1 Package ContentsSystem Requirements FeaturesPWR Light Getting to Know the Print ServerWlan Light Printer 1 LightPrinter 3 Light Power PortLAN Light P2, P3 PortsTechnical Support Reset ButtonLAN Port Technical SupportThis page left intentionally blank Connecting the Print Server Setting Up Print ServerTo configure the Print Server Configuring the Print ServerSetting Up the Print Server Page Setting Up the Print Server Page Setting Up the Print Server Page Configuring the Printer’s Settings Connecting the Printer Accessing the Print Server Manager Using the Print Server ManagerStatus MAC ID Device Info SetupPrint Server Name Save/Cancel Set User Name/PasswordSMB Group Name Dhcp Server Polling Time Queue Serviced by PrinterNetware Server Printer Type Zone NamePrinting Protocols Upgrade FirmwarePort Name Wireless Function Assign Your Wireless Network Manually Scan for your local Wireless NetworkBox. Click Next WEP Ascii DisableWEP HEX After configuring, click NextAfter selecting, click Next WPA shared keyLocation ContactWizard Using the Print Server Manager Page Refresh ReportSearch RebootAccessing the Web Administrator Using the Web AdministratorTo access the Web Adminsitrator Device Name Device SetupDisplays the Print Server’s device name Printer Server NameModel Type Wireless LAN StatusSystem Up Time MAC AddressPrinter SMB Page Setup Wizard Page Using the Web Administrator WPA- shared key WEPUsing the Web Administrator Page Using the Web Administrator System Tools Load DefaultUsing the Web Administrator This page left intentionally blank Welcome window appears. Click Next Accessing Printers From the NetworkPage Accessing Printers From the Network This page left intentionally blank While saving settings, a Save Timed Out error occurs TroubleshootingPrinter Server Utility does not detect the Print Server Printer prints strange or nonsensical charactersThis page left intentionally blank Specifications a Relative Humidity 80 % non-condensing Limited Warranty Year Using Internet Printer Protocol Page Appendix b Using Internet Printer Protocol This page left intentionally blank Glossary Access PointPage Ssid Page Modifications Regulatory Compliance NoticesClass B Equipment All other names are the property of their respective owners Miscellaneous Legal NoticesLimited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty