Actiontec electronic 802PSG user manual Technical Support, LAN Port, Reset Button

Page 8

Chapter 1 Introduction

LAN Port

The LAN port is used to connect the Print Server to a computer via Ethernet cable.

Reset Button

The Reset button is used to restore the Print Server’s factory default settings. To do this, press the Reset button for 15 seconds.

Technical Support

Actiontec Electronics prides itself on making durable, high-quality, high-perfor- mance products. If you need assistance, the Actiontec Technical Support Department is available all day every day to provide professional support.

Actiontec Electronics, Inc.

760 N. Mary Avenue

Sunnyvale, CA 94085

Technical Support

Phone: (USA) 1-888-436-0657

E-mail: http://support.actiontec.com/email_support/support_form.php

Internet: www.actiontec.com/support

5

Image 8
Contents Wireless Multiport Print Server Table of Contents This page left intentionally blank Package Contents Introduction1Features System RequirementsGetting to Know the Print Server PWR LightWlan Light Printer 1 LightPower Port Printer 3 LightLAN Light P2, P3 PortsReset Button Technical SupportLAN Port Technical SupportThis page left intentionally blank Setting Up Print Server Connecting the Print ServerConfiguring the Print Server To configure the Print ServerSetting Up the Print Server Page Setting Up the Print Server Page Setting Up the Print Server Page Configuring the Printer’s Settings Connecting the Printer Using the Print Server Manager Accessing the Print Server ManagerStatus MAC ID Print Server Name SetupDevice Info SMB Group Name Set User Name/PasswordSave/Cancel Dhcp Server Netware Server Queue Serviced by PrinterPolling Time Zone Name Printer TypePort Name Upgrade FirmwarePrinting Protocols Wireless Function Box. Click Next Scan for your local Wireless NetworkAssign Your Wireless Network Manually Disable WEP AsciiAfter configuring, click Next WEP HEXWPA shared key After selecting, click NextContact LocationWizard Using the Print Server Manager Page Report RefreshReboot SearchTo access the Web Adminsitrator Using the Web AdministratorAccessing the Web Administrator Device Setup Device NameDisplays the Print Server’s device name Printer Server NameWireless LAN Status Model TypeSystem Up Time MAC AddressPrinter SMB Page Setup Wizard Page Using the Web Administrator WEP WPA- shared keyUsing the Web Administrator Page Using the Web Administrator Load Default System ToolsUsing the Web Administrator This page left intentionally blank Accessing Printers From the Network Welcome window appears. Click NextPage Accessing Printers From the Network This page left intentionally blank Troubleshooting While saving settings, a Save Timed Out error occursPrinter Server Utility does not detect the Print Server Printer prints strange or nonsensical charactersThis page left intentionally blank Specifications a Relative Humidity 80 % non-condensing Limited Warranty Year Using Internet Printer Protocol Page Appendix b Using Internet Printer Protocol This page left intentionally blank Access Point GlossaryPage Ssid Page Class B Equipment Regulatory Compliance NoticesModifications Miscellaneous Legal Notices All other names are the property of their respective ownersLimited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty