Actiontec electronic 802PSG user manual Connecting the Printer

Page 19

Actiontec 54 Mbps Wireless Multiport Print Server User Manual

Connecting the Printer

To connect the printer to the Print Server:

1.Unplug the Ethernet cable and Power cord from the Print Server.

2.Unplug the printer’s USB or parallel cable from the computer and insert it into the Print Server port selected in step 2 of “Configuring the Printer’s Settings.”

3.Plug the Power cord back into the Power port of the Print Server.

4.Make sure the Power and WLAN lights are blinking or glowing steadily.

The Print Server is now connected to a printer and wireless router, and configured for use.

16

Image 19

Contents Wireless Multiport Print Server Table of Contents This page left intentionally blank Introduction1 Package ContentsSystem Requirements FeaturesPrinter 1 Light Getting to Know the Print ServerPWR Light Wlan LightP2, P3 Ports Power PortPrinter 3 Light LAN LightTechnical Support Reset ButtonTechnical Support LAN PortThis page left intentionally blank Connecting the Print Server Setting Up Print ServerTo configure the Print Server Configuring the Print ServerSetting Up the Print Server Page Setting Up the Print Server Page Setting Up the Print Server Page Configuring the Printer’s Settings Connecting the Printer Accessing the Print Server Manager Using the Print Server ManagerStatus MAC ID Device Info SetupPrint Server Name Save/Cancel Set User Name/PasswordSMB Group Name Dhcp Server Polling Time Queue Serviced by PrinterNetware Server Printer Type Zone NamePrinting Protocols Upgrade FirmwarePort Name Wireless Function Assign Your Wireless Network Manually Scan for your local Wireless NetworkBox. Click Next WEP Ascii DisableWEP HEX After configuring, click NextAfter selecting, click Next WPA shared keyLocation ContactWizard Using the Print Server Manager Page Refresh ReportSearch RebootAccessing the Web Administrator Using the Web AdministratorTo access the Web Adminsitrator Printer Server Name Device SetupDevice Name Displays the Print Server’s device nameMAC Address Wireless LAN StatusModel Type System Up TimePrinter SMB Page Setup Wizard Page Using the Web Administrator WPA- shared key WEPUsing the Web Administrator Page Using the Web Administrator System Tools Load DefaultUsing the Web Administrator This page left intentionally blank Welcome window appears. Click Next Accessing Printers From the NetworkPage Accessing Printers From the Network This page left intentionally blank Printer prints strange or nonsensical characters TroubleshootingWhile saving settings, a Save Timed Out error occurs Printer Server Utility does not detect the Print ServerThis page left intentionally blank Specifications a Relative Humidity 80 % non-condensing Limited Warranty Year Using Internet Printer Protocol Page Appendix b Using Internet Printer Protocol This page left intentionally blank Glossary Access PointPage Ssid Page Modifications Regulatory Compliance NoticesClass B Equipment All other names are the property of their respective owners Miscellaneous Legal NoticesLimited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty