Network Management Card – User Manual 34003991EN/EB Page 15/118
Ethernet port
LED Colour Activity Description
ACT Green ◗ Off ◗ Card not connected to the network.
◗ On ◗ Card connected to the network but
without activity
◗ Flashing ◗ Port is active in receiving /
transmission
100M Orange ◗ Off ◗ Port operating at 10Mbits/s.
◗ On ◗ Port operating at 100Mbits/s.
Service port
LED Colour Activity Description
UPS Green ◗ Off ◗ Card startup in progress.
Data ◗ On ◗ Communication with UPS in
progress
◗ Flashing
◗ Normal operation.
Communication with the UPS is
operational
RS232 Orange ◗ Off ◗ Configuration menu is active
◗ On ◗ Normal operation. Configuration
menu is deactived
◗ Flashing ◗ Communication with the
Environment Sensor (option).
The Network Management Card (66102) can be "hot" installed in all UPSs of the MGE Office Protection Systems or
Powerware range equipped with a Minislot without having to shut it down.
◗ Remove the protective plastic cover from the Minislot
◗ Note the card's MAC address prior to insertion
◗ Insert and tighten the card's retaining screws
◗ Connect the ETHERNET cable
◗ Wait 2 min. the card is completely operational when the green UPS Data LED flashes continuously