6 Configuration via RS232
◗Use the cord supplied with the card.
◗Connect the card to a computer equipped with a hyperterminal type emulator. The serial link must be set at 9600 baud, 8 bits, no parity, 1 stop bit, and without flow control.
◗Check that UPS power is on.
◗Enter the admin password (not modifiable).
◗The menu is in English only.
EATON
NETWORK MANAGEMENT CARD
1 : Reset
2 : Network configuration
3 : Set Login Password to Default
4 : Return to Default Configuration
0 : Exit
Network Management Card – User Manual | 34003991EN/EB | Page 72/118 |
