Network Management Card – User Manual 34003991EN/EB Page 110/118
Inverter fault Inverter OK
Inverter overload Inverter load OK
Inverter overtemperature Inverter temperature OK
Inverter short circuit Inverter OK
Inverter thermal overload Inverter load OK
Output switch (Q5N) open Output switch (Q5N) closed
Load short circuit Load OK
Single wave load fault Load OK
Negative DC bus too high Negative DC bus OK
Positive DC bus too high Positive DC bus OK
Rectifier fault Rectifier OK
Negative DC bus too low Negative DC bus OK
Positive DC bus too low Positive DC bus OK
Protection Lost Protection OK
Redundancy Lost Redundancy OK
Normal AC NOK Normal AC OK
Low battery Battery OK
UPS communication failed UPS communication restored
UPS data base not available UPS data base OK
UPS on battery UPS on normal AC
Emergency button ON Emergency button OFF
Fan fault Fan OK
Load not powered Load powered
UPS internal fault UPS OK
Battery fault Battery OK
UPS overload UPS returns to normal load
UPS overtemperature UPS temperature OK
Imminent UPS shutoff UPS OK
< Sensor Name> : Temperature is above high threshold
<xx> (°C) or (°F)
<Sensor Name> : Temperature is in normal range
< Sensor Name> : Humidity is above high threshold <xx>
(%)
<Sensor Name> : Temperature is in normal range
< Sensor Name> : Temperature is below low threshold
<xx> °C or (°F)
<Sensor Name> : Temperature is in normal range
< Sensor Name> : Humidity is below high threshold <xx>
(%)
<Sensor Name> : Temperature is in normal range
<Sensor name>: <Input #1 label> <when closed label>
<Sensor name>: <Input #1 label> <when open label>
<Sensor name>: <Input #2 label> <when closed label>
<Sensor name>: <Input #2 label> <when open label>>