Wacom 20WSX, DTZ-2000W manual Installation

Page 22

•As necessary, conﬁgure the display control panel settings for the proper size and color resolution. The maximum (native) resolution of the Cintiq 20WSX is 1680 x 1050 pixels with 24 bit color (8 bits per color). The display size and color resolution may be constrained by the capabilities of your video card. See the video card manufacturer’s documentation for details.

•If you are using analog (VGA) mode, you may want to ﬁne-tune the display. Please refer to Adjusting pitch and phase (VGA only) on page 39, and to Adjusting the LCD monitor beginning on page 36 for more information.

For Windows: If you are using Cintiq as a secondary display, you may ﬁrst need to enable Cintiq in your Display Properties control panel.

•After the LCD monitor portion of Cintiq is working to your satisfaction, move on to Step 2: Pen tablet installation to install the pen tablet portion of Cintiq.

For troubleshooting tips, please refer to page 41.

Notes:

Each Cintiq LCD panel is produced under very stringent quality standards. Production techniques cannot guarantee an absolutely perfect TFT display, and some panels may exhibit a certain number of pixels that show an incorrect color. Refer to the speciﬁcations on page 62 for more information.

If an image has ﬁne striping (such as screen stripes), it may appear to ﬂicker or display a moiré pattern.

Do not apply excessive pressure on the display surface, it may cause the appearance of a moiré or pooling pattern. If you notice this action, use less pressure on the display screen when working with the pen.

When a still image is displayed for a long period of time, an after-image may remain for a short time. To prevent this, Wacom recommends using a screen saver or other power management feature.

Important: To extend the life of the backlight, set your computer’s power management to turn off the display when it is not in use for an extended period of time.

Installation

Page 20

Image 22

Contents Page Page Introduction and Overview Physical location Precautions on USE and HandlingTemperature and Humidity EnvironmentHandling Cintiq pen display has a backlight which contains mercury HgPage Contents Contents Package contents Unpacking Your CintiqBearing recess Front feet Setting up the Cintiq standIncline adjustment levers Rear feetUnpacking and mounting the Cintiq pen display Bearing hub Bearing recessAdjusting the display incline Adjusting rotation Using the pen holderRemoving Cintiq from the display stand Cintiq PEN Display Components Front viewRear view Installation System requirementsDVI-D connector LCD monitor installationDVI-I connector VGA connectorApple ADC connector Mini-VGA port LCD monitor cabling diagram Select the option Browse MY Computer for Driver Software Installation USB cable installation Pen tablet installationPen tablet cabling diagram Software installation Next stepsWorking with Your Cintiq Using the penPen components Pen operations Working with the tablet controls Using the ExpressKeys Tips Using the Touch Strips Working with your Cintiq Setting up your work area Hints Customizing Opening the control panelCustomization basics Calibrating Cintiq Learning more about Cintiq Factory presets, auto-sync, and user settings Adjusting the LCD monitorWorking with on screen display settings To automatically adjust, use the Reset option RESET. Provides two options Adjusting pitch and phase VGA only Power saving Computer mode Sync Video Power consumptionIf the Cintiq power LED does not light, check the following TroubleshootingTesting Cintiq If there is no displayVerify that the tablet and Grip Pen are working Testing the ExpressKeys Testing your input tools and pen display controlsTesting the Touch Strips Pen Testing a penAirbrush Display troubleshooting General display problemsVGA problems Pen tablet troubleshooting General problemsTroubleshooting Troubleshooting Troubleshooting Windows-speciﬁc problems Macintosh-speciﬁc problemsTechnical support options Asia Paciﬁc English China Obtaining driver downloadsJapan Korea TaiwanAppendix CleaningCaring for Cintiq To remove the old nib Replacing the pen tipTo insert a new nib To lock Cintiq to the display stand Optional display conﬁgurationsLock screws Using an alternate mount or stand To attach Cintiq to a Vesa 100 mounting platformTo remove Cintiq from an alternate mounting platform Appendix Pen and digital ink capabilities in Windows Vista About the Windows Vista Tablet PC Input PanelWindows Uninstalling CintiqMacintosh Cintiq 20WSX model DTZ-2000W general speciﬁcations Product speciﬁcationsLCD monitor Display stand Power adapterPen tablet Grip pen model ZP-501EAccessories Purchasing parts and accessories Display adaptersFederal Communications Commission FCC notice Radio and television interferenceCE declaration Warranty Warranty Service Outside of the U.S.A. and Canada Warranty Service in the U.S.A. and CanadaNorth and South America contact Wacom China Corporation Wacom Technology Corporation Wacom Europe GmbHTelephone UE-0364