Wacom DTZ-2000W, 20WSX manual Adjusting pitch and phase VGA only

Page 41

Adjusting pitch and phase (VGA only)

Some computers and video cards may not allow the auto-sync function to fully work when Cintiq is ﬁrst connected. If some portion of text appears blurred, open the OSD menu, go to the RESET menu, and select the AUTO ADJUST option. If the image is still blurred, adjust the pitch and phase manually by following the procedure below. For optimal display quality, set your video card to Cintiq’s native resolution of 1680 x 1050 pixels.

•In the Wacom Tablet control panel, select the CALIBRATE tab.

•If you are working with multiple displays, be sure the display corresponding to Cintiq is selected in the MONITOR menu.

•Click on the CALIBRATE... button to activate the calibration screen.

•Using the OSD controls, open the OSD menu and select the Pitch icon. Then adjust the pitch level so that the pattern of ﬁne vertical stripes displays evenly. (For details on changing the OSD settings, see Working with on screen display settings on page 36.)

•Next, in the OSD menu select the Phase icon and adjust the phase level so that the adjustment pattern shows clearly.

•After completing these adjustments, press the ENTER and MENU buttons to exit the OSD menu.

•Click on the CANCEL button or press ESC to exit the calibration screen.

Adjustment pattern for pitch and phase.

Customizing

Page 39

Image 41

Contents Page Page Introduction and Overview Temperature and Humidity Precautions on USE and HandlingPhysical location EnvironmentCintiq pen display has a backlight which contains mercury Hg HandlingPage Contents Contents Unpacking Your Cintiq Package contentsIncline adjustment levers Setting up the Cintiq standBearing recess Front feet Rear feetBearing hub Bearing recess Unpacking and mounting the Cintiq pen displayAdjusting the display incline Using the pen holder Adjusting rotationRemoving Cintiq from the display stand Front view Cintiq PEN Display ComponentsRear view System requirements InstallationDVI-I connector LCD monitor installationDVI-D connector VGA connectorApple ADC connector Mini-VGA port LCD monitor cabling diagram Select the option Browse MY Computer for Driver Software Installation Pen tablet cabling diagram Pen tablet installationUSB cable installation Next steps Software installationPen components Using the penWorking with Your Cintiq Pen operations Working with the tablet controls Using the ExpressKeys Tips Using the Touch Strips Working with your Cintiq Setting up your work area Hints Opening the control panel CustomizingCustomization basics Calibrating Cintiq Learning more about Cintiq Working with on screen display settings Adjusting the LCD monitorFactory presets, auto-sync, and user settings To automatically adjust, use the Reset option RESET. Provides two options Adjusting pitch and phase VGA only Computer mode Sync Video Power consumption Power savingTesting Cintiq TroubleshootingIf the Cintiq power LED does not light, check the following If there is no displayVerify that the tablet and Grip Pen are working Testing the Touch Strips Testing your input tools and pen display controlsTesting the ExpressKeys Airbrush Testing a penPen General display problems Display troubleshootingVGA problems General problems Pen tablet troubleshootingTroubleshooting Troubleshooting Troubleshooting Macintosh-speciﬁc problems Windows-speciﬁc problemsTechnical support options Japan Obtaining driver downloadsAsia Paciﬁc English China Korea TaiwanCaring for Cintiq CleaningAppendix To insert a new nib Replacing the pen tipTo remove the old nib Lock screws Optional display conﬁgurationsTo lock Cintiq to the display stand To attach Cintiq to a Vesa 100 mounting platform Using an alternate mount or standTo remove Cintiq from an alternate mounting platform Appendix About the Windows Vista Tablet PC Input Panel Pen and digital ink capabilities in Windows VistaMacintosh Uninstalling CintiqWindows LCD monitor Product speciﬁcationsCintiq 20WSX model DTZ-2000W general speciﬁcations Pen tablet Power adapterDisplay stand Grip pen model ZP-501EAccessories Display adapters Purchasing parts and accessoriesCE declaration Radio and television interferenceFederal Communications Commission FCC notice Warranty North and South America contact Warranty Service in the U.S.A. and CanadaWarranty Service Outside of the U.S.A. and Canada Telephone Wacom Technology Corporation Wacom Europe GmbHWacom China Corporation UE-0364