Wacom DTZ-2000W, 20WSX Handling, Cintiq pen display has a backlight which contains mercury Hg

Page 5

Handling

WARNING High Voltage. Do not open or disassemble the Cintiq pen display. There is a risk of

electrical shock when the casing is open. This will also void your warranty and Wacom shall have no responsibility to repair or replace the product.

WARNING Do not operate the display stand incline adjustment levers when Cintiq is not mounted

on the stand, and do not lift the stand by the adjustment levers; the stand is spring- loaded and may cause injury or damage if released without the weight of Cintiq on the stand. Improper operation may lead to physical injury or damage to the stand.

WARNING When moving Cintiq to a different location, either remove the display unit from the stand (see page 12 for details) and then move both items separately, use the lock screws to fix Cintiq to the stand (see page 56 for details), or hold onto both Cintiq and the stand to make sure that the stand does not separate from the display unit when moving them together.

Before moving Cintiq, first adjust the stand to its full upright position; this will reduce the spring tension so that the stand will not accidentally release and snap shut. If the display unit is in landscape orientation, use one hand to grasp the bottom of the display and with your other hand grasp the back of the stand. Be sure to lift on both the display and the stand so that the stand will not separate from the display when moving Cintiq.

If Cintiq is in portrait orientation or has been locked to the stand with the rotation lock screws (see page 56), the stand will not separate from the display unit and Cintiq can be safely lifted by grasping the display unit with both hands.

Always follow the instructions on page 12 to remove the display unit from the stand.

WARNING If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking

from it; this liquid is an irritant. In case of contact with skin, eyes, or mouth, rinse immediately with running water for at least 15 minutes or more. If contact is made with the eyes or mouth, also consult a physician.

WARNING

Hg

– LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.

The Cintiq pen display has a backlight which contains mercury (Hg).

Be sure to dispose of properly, and to manage any disposal of this unit in accordance with your local ordinances and laws.

WARNING Do not disassemble the Cintiq stand. Improper disassembly could result in physical injury or damage to the stand. In this case, Wacom shall have no responsibility to repair or replace the product.

WARNING Prevent children from swallowing the pen tip or side switch. The pen tip or side switch

may accidentally be pulled out if children are biting on them.

CAUTION Do not disassemble the Grip Pen. This may cause the device to malfunction. In this case, Wacom shall have no responsibility to repair or replace the product.

CAUTION Do not scratch the display screen. Avoid placing sharp objects on the display screen surface.

CAUTION Avoid intensive shock or vibration to Cintiq, the Cintiq stand, or the Grip Pen. Hitting or

dropping Cintiq may damage the display screen or other components.

Precautions on use and handling Page 3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Page Page Introduction and Overview Temperature and Humidity Precautions on USE and HandlingPhysical location EnvironmentCintiq pen display has a backlight which contains mercury Hg HandlingPage Contents Contents Unpacking Your Cintiq Package contentsIncline adjustment levers Setting up the Cintiq standBearing recess Front feet Rear feetBearing hub Bearing recess Unpacking and mounting the Cintiq pen displayAdjusting the display incline Using the pen holder Adjusting rotationRemoving Cintiq from the display stand Front view Cintiq PEN Display ComponentsRear view System requirements InstallationDVI-I connector LCD monitor installationDVI-D connector VGA connectorApple ADC connector Mini-VGA port LCD monitor cabling diagram Select the option Browse MY Computer for Driver Software Installation Pen tablet cabling diagram Pen tablet installationUSB cable installation Next steps Software installationPen components Using the penWorking with Your Cintiq Pen operations Working with the tablet controls Using the ExpressKeys Tips Using the Touch Strips Working with your Cintiq Setting up your work area Hints Opening the control panel CustomizingCustomization basics Calibrating Cintiq Learning more about Cintiq Working with on screen display settings Adjusting the LCD monitorFactory presets, auto-sync, and user settings To automatically adjust, use the Reset option RESET. Provides two options Adjusting pitch and phase VGA only Computer mode Sync Video Power consumption Power savingTesting Cintiq TroubleshootingIf the Cintiq power LED does not light, check the following If there is no displayVerify that the tablet and Grip Pen are working Testing the Touch Strips Testing your input tools and pen display controlsTesting the ExpressKeys Airbrush Testing a penPen General display problems Display troubleshootingVGA problems General problems Pen tablet troubleshootingTroubleshooting Troubleshooting Troubleshooting Macintosh-specific problems Windows-specific problemsTechnical support options Japan Obtaining driver downloadsAsia Pacific English China Korea TaiwanCaring for Cintiq CleaningAppendix To insert a new nib Replacing the pen tipTo remove the old nib Lock screws Optional display configurationsTo lock Cintiq to the display stand To attach Cintiq to a Vesa 100 mounting platform Using an alternate mount or standTo remove Cintiq from an alternate mounting platform Appendix About the Windows Vista Tablet PC Input Panel Pen and digital ink capabilities in Windows VistaMacintosh Uninstalling CintiqWindows LCD monitor Product specificationsCintiq 20WSX model DTZ-2000W general specifications Pen tablet Power adapterDisplay stand Grip pen model ZP-501EAccessories Display adapters Purchasing parts and accessoriesCE declaration Radio and television interferenceFederal Communications Commission FCC notice Warranty North and South America contact Warranty Service in the U.S.A. and CanadaWarranty Service Outside of the U.S.A. and Canada Telephone Wacom Technology Corporation Wacom Europe GmbHWacom China Corporation UE-0364
Top Page Image Contents