Wacom DTZ-2100D manual Customizing

Page 38

The basic process for working with the OSD is as follows:

•Press the MENU button to open the OSD main menu.

•Press the up or down buttons to toggle between the main menu icons. Then press the SELECT button to choose the highlighted icon.

•Press the up or down buttons to toggle between menu options. Press the SELECT button to choose the highlighted option.

Note that some options, such as POSITION, are not available when in DVI mode.

The Main Control icon displays a DVI or VGA identiﬁer, depending on which video interface is currently in use.

•Press the up or down buttons to select a setting for adjustment. Press the SELECT button to choose the highlighted setting.

Note that some settings may not be available when in DVI mode.

•Use the up or down buttons to increase or decrease the setting value.

•Press the ENTER button to accept your changes.

Note: After changing a setting, the OSD menu will automatically close after a few moments of inactivity. You can also continue to press ENTER in order to back out of the OSD menu. All settings are automatically saved when the OSD menu closes. If you make changes to the display appearance and cannot return to the original settings, go to the RESET menu and select the FACTORY RESET option to return Cintiq to its original factory defaults.

See the following pages for details about the OSD menu options.

Customizing

Page 36

Image 38

Contents Page Page Introduction and Overview Physical Location Precautions on USE and HandlingTemperature and Humidity EnvironmentUsage HandlingCintiq pen display has a backlight which contains mercury Hg Page Contents Troubleshooting AppendixPackage Contents Unpacking Your CintiqBearing recess Front feet Setting UP the Cintiq StandIncline adjustment levers Rear feetUnpacking and Mounting the Cintiq PEN Display Bearing hub Bearing recessAdjusting the Display Incline Adjusting Rotation Using the PEN HolderRemoving Cintiq from the Display Stand Cintiq PEN Display Components Front ViewRear View Installation System RequirementsDisplay Installation Apple ADC connector Mini-VGA port Display Cabling Diagram Select the option Browse MY Computer for Driver Software Installation PEN Tablet USB Cabling Diagram PEN Tablet InstallationUSB Cable Installation Software Installation Next stepsTip Switch Using the Grip PENEraser DuoSwitch Working with Your CintiqBasic PEN Operations Working with your Cintiq Tablet Controls Touch StripUsing Expresskeys TipsUsing the Touch Strips Setting UP Your Work Area Hints Learning More about Cintiq CustomizingOpening the Control Panel Tabs display customizable settings for the selected tool Customization BasicsCalibrating Cintiq On Screen Display OSD Settings Adjusting the DisplayFactory PRESETS, AUTO-SYNC, and User Settings Customizing OSD Control ResetMain Control LanguageCustomizing Adjusting Clock and Phase VGA only Video Power consumption Power SavingComputer mode Sync If Cintiq’s power LED does not light, check the following TroubleshootingTesting Cintiq If there is no displayVerify that the tablet and Grip Pen are working Testing the Touch Strips Testing Controls and Input ToolsTesting the Expresskeys Airbrush Testing a PENPen Display Troubleshooting General Display ProblemsVGA Problems PEN Tablet Troubleshooting General ProblemsTroubleshooting Troubleshooting WINDOWS-SPECIFIC Problems MACINTOSH-SPECIFIC Problems Troubleshooting onTechnical Support Options Asia Paciﬁc English China Obtaining Driver DownloadsJapan Korea TaiwanCaring for Cintiq CleaningAppendix To insert a new nib Replacing the PEN TIPTo remove the old nib Lock screws Optional Display ConfigurationsTo lock Cintiq to the display stand Using AN Alternate Mount or Stand To attach Cintiq to a Vesa 100 mounting platformTo remove Cintiq from an alternate mounting platform Appendix PEN and Digital INK Capabilities in Windows Vista About the Windows Vista Tablet PC Input Panel Macintosh Uninstalling CintiqWindows Display Product SpecificationsGeneral Specifications Display Stand Power AdapterPEN Tablet Grip PEN Model ZP-501EAccessories Ordering Parts and Accessories Radio and Television Interference Federal Communications Commission FCC NoticeIndustry Canada, Class B Industry Canada Canada onlyCE Declaration Warranty North and South America contact Warranty Service in the U.S.A. and CanadaWarranty Service Outside of the U.S.A. and Canada This page intentionally left blank This page intentionally left blank Telephone Wacom Technology Corporation Wacom Europe GmbHWacom China Corporation UE-0308 E