Wacom DTZ-2100D manual Adjusting Clock and Phase VGA only

Page 41

ADJUSTING CLOCK AND PHASE (VGA ONLY)

Some computers and video cards may not allow the auto-sync function to fully work when Cintiq is ﬁrst connected. If some portion of text appears blurred, press the AUTO button to automatically synchronize to the incoming signal (refer to the description about auto-sync on page 35). If the image is still blurred, adjust the clock and phase manually by following the procedure below. For optimal display quality, set your video card to Cintiq’s native resolution of 1600 x 1200 pixels.

•In the Wacom Tablet control panel, select the CALIBRATE tab.

•If you are working with multiple displays, be sure the display corresponding to Cintiq is selected in the MONITOR menu.

•Click on the CALIBRATE... button to activate the calibration screen.

•Using the OSD controls, open the OSD main menu. Select the IMAGE and CLOCK options, then adjust the clock level so that the pattern of ﬁne vertical stripes displays evenly.

(For details on changing the OSD settings, see On Screen Display (OSD) settings on

page 35.)

•Next, in the OSD menu select the IMAGE and PHASE options. Adjust the phase level so that the adjustment pattern shows clearly.

•After completing these adjustments, exit the OSD menu.

•Click on the CANCEL button or press ESC to exit the calibration screen.

Adjustment pattern for clock and phase.

Customizing

Page 39

Image 41

Contents Page Page Introduction and Overview Temperature and Humidity Precautions on USE and HandlingPhysical Location EnvironmentHandling UsageCintiq pen display has a backlight which contains mercury Hg Page Contents Appendix TroubleshootingUnpacking Your Cintiq Package ContentsIncline adjustment levers Setting UP the Cintiq StandBearing recess Front feet Rear feetBearing hub Bearing recess Unpacking and Mounting the Cintiq PEN DisplayAdjusting the Display Incline Using the PEN Holder Adjusting RotationRemoving Cintiq from the Display Stand Front View Cintiq PEN Display ComponentsRear View System Requirements InstallationDisplay Installation Apple ADC connector Mini-VGA port Display Cabling Diagram Select the option Browse MY Computer for Driver Software Installation PEN Tablet USB Cabling Diagram PEN Tablet InstallationUSB Cable Installation Next steps Software InstallationEraser DuoSwitch Using the Grip PENTip Switch Working with Your CintiqBasic PEN Operations Working with your Cintiq Touch Strip Tablet ControlsTips Using ExpresskeysUsing the Touch Strips Setting UP Your Work Area Hints Learning More about Cintiq CustomizingOpening the Control Panel Customization Basics Tabs display customizable settings for the selected toolCalibrating Cintiq On Screen Display OSD Settings Adjusting the DisplayFactory PRESETS, AUTO-SYNC, and User Settings Customizing Main Control ResetOSD Control LanguageCustomizing Adjusting Clock and Phase VGA only Video Power consumption Power SavingComputer mode Sync Testing Cintiq TroubleshootingIf Cintiq’s power LED does not light, check the following If there is no displayVerify that the tablet and Grip Pen are working Testing the Touch Strips Testing Controls and Input ToolsTesting the Expresskeys Airbrush Testing a PENPen General Display Problems Display TroubleshootingVGA Problems General Problems PEN Tablet TroubleshootingTroubleshooting Troubleshooting WINDOWS-SPECIFIC Problems Troubleshooting on MACINTOSH-SPECIFIC ProblemsTechnical Support Options Japan Obtaining Driver DownloadsAsia Paciﬁc English China Korea TaiwanCaring for Cintiq CleaningAppendix To insert a new nib Replacing the PEN TIPTo remove the old nib Lock screws Optional Display ConfigurationsTo lock Cintiq to the display stand To attach Cintiq to a Vesa 100 mounting platform Using AN Alternate Mount or StandTo remove Cintiq from an alternate mounting platform Appendix PEN and Digital INK Capabilities in Windows Vista About the Windows Vista Tablet PC Input Panel Macintosh Uninstalling CintiqWindows Display Product SpecificationsGeneral Specifications PEN Tablet Power AdapterDisplay Stand Grip PEN Model ZP-501EAccessories Ordering Parts and Accessories Federal Communications Commission FCC Notice Radio and Television InterferenceIndustry Canada, Class B Industry Canada Canada onlyCE Declaration Warranty North and South America contact Warranty Service in the U.S.A. and CanadaWarranty Service Outside of the U.S.A. and Canada This page intentionally left blank This page intentionally left blank Telephone Wacom Technology Corporation Wacom Europe GmbHWacom China Corporation UE-0308 E