Wacom DTZ-2100D manual Usage, Handling

Page 5

USAGE

WARNING Only use the power adapter that came with Cintiq. If a different type of power adapter is

used, Cintiq will not work properly or may be damaged. Using a different type of power adapter also has the potential to result in fire. Use of a different power adapter will void your warranty.

CAUTION Be sure to use a grounded power source when applying power to Cintiq.

CAUTION Do not connect or disconnect the video or power cables while Cintiq or your computer

are turned on; this may damage the display or computer video card. In this case, Wacom shall have no responsibility to repair or replace the product.

CAUTION This product is for use with a DVI or VGA video card; using an inappropriate video card

may damage Cintiq.

CAUTION Do not block the rear panel ventilation holes; this may overheat and damage the unit.

When not using Cintiq for long periods of time, unplug the power adapter from the AC outlet.

HANDLING

WARNING High Voltage. Do not open or disassemble the Cintiq pen display. There is a risk of

electrical shock when the casing is open. This will also void your warranty and Wacom shall have no responsibility to repair or replace the product.

WARNING Do not operate the display stand incline adjustment levers when Cintiq is not mounted

on the stand, and do not lift the stand by the adjustment levers; the stand is spring- loaded and may cause injury or damage if released without the weight of Cintiq on the stand. Improper operation may lead to physical injury or damage to the stand.

WARNING When moving Cintiq to a different location, either remove the display unit from the stand (see page 13 for details) and then move both items separately, use the lock screws to fix Cintiq to the stand (see page 56 for details), or hold onto both Cintiq and the stand to make sure that the stand does not separate from the display unit when moving them together.

Before moving Cintiq, first adjust the stand to its full upright position; this will reduce the spring tension so that the stand will not accidentally release and snap shut. If the display unit is in landscape orientation, use one hand to grasp the bottom of the display and with your other hand grasp the back of the stand. Be sure to lift on both the display and the stand so that the stand will not separate from the display when moving Cintiq.

If Cintiq is in portrait orientation or has been locked to the stand with the rotation lock screws (see page 56), the stand will not separate from the display unit and Cintiq can be safely lifted by grasping the display unit with both hands.

Always follow the instructions on page 13 to remove the display unit from the stand.

WARNING If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking

from it; this liquid is an irritant. In case of contact with skin, eyes, or mouth, rinse immediately with running water for at least 15 minutes or more. If contact is made with the eyes or mouth, also consult a physician.

Precautions on use and handling

Page 3

Image 5
Contents Page Page Introduction and Overview Temperature and Humidity Precautions on USE and HandlingPhysical Location EnvironmentHandling UsageCintiq pen display has a backlight which contains mercury Hg Page Contents Appendix TroubleshootingUnpacking Your Cintiq Package ContentsIncline adjustment levers Setting UP the Cintiq StandBearing recess Front feet Rear feetBearing hub Bearing recess Unpacking and Mounting the Cintiq PEN DisplayAdjusting the Display Incline Using the PEN Holder Adjusting RotationRemoving Cintiq from the Display Stand Front View Cintiq PEN Display ComponentsRear View System Requirements InstallationDisplay Installation Apple ADC connector Mini-VGA port Display Cabling Diagram Select the option Browse MY Computer for Driver Software Installation PEN Tablet USB Cabling Diagram PEN Tablet InstallationUSB Cable Installation Next steps Software InstallationEraser DuoSwitch Using the Grip PENTip Switch Working with Your CintiqBasic PEN Operations Working with your Cintiq Touch Strip Tablet ControlsTips Using ExpresskeysUsing the Touch Strips Setting UP Your Work Area Hints Learning More about Cintiq CustomizingOpening the Control Panel Customization Basics Tabs display customizable settings for the selected toolCalibrating Cintiq On Screen Display OSD Settings Adjusting the DisplayFactory PRESETS, AUTO-SYNC, and User Settings Customizing Main Control ResetOSD Control LanguageCustomizing Adjusting Clock and Phase VGA only Video Power consumption Power SavingComputer mode Sync Testing Cintiq TroubleshootingIf Cintiq’s power LED does not light, check the following If there is no displayVerify that the tablet and Grip Pen are working Testing the Touch Strips Testing Controls and Input ToolsTesting the Expresskeys Airbrush Testing a PENPen General Display Problems Display TroubleshootingVGA Problems General Problems PEN Tablet TroubleshootingTroubleshooting Troubleshooting WINDOWS-SPECIFIC Problems Troubleshooting on MACINTOSH-SPECIFIC ProblemsTechnical Support Options Japan Obtaining Driver DownloadsAsia Pacific English China Korea TaiwanCaring for Cintiq CleaningAppendix To insert a new nib Replacing the PEN TIPTo remove the old nib Lock screws Optional Display ConfigurationsTo lock Cintiq to the display stand To attach Cintiq to a Vesa 100 mounting platform Using AN Alternate Mount or StandTo remove Cintiq from an alternate mounting platform Appendix PEN and Digital INK Capabilities in Windows Vista About the Windows Vista Tablet PC Input Panel Macintosh Uninstalling CintiqWindows Display Product SpecificationsGeneral Specifications PEN Tablet Power AdapterDisplay Stand Grip PEN Model ZP-501EAccessories Ordering Parts and Accessories Federal Communications Commission FCC Notice Radio and Television InterferenceIndustry Canada, Class B Industry Canada Canada onlyCE Declaration Warranty North and South America contact Warranty Service in the U.S.A. and CanadaWarranty Service Outside of the U.S.A. and Canada This page intentionally left blank This page intentionally left blank Telephone Wacom Technology Corporation Wacom Europe GmbHWacom China Corporation UE-0308 E