Toshiba S20 instruction manual Precautions on ordering cables/cords

Page 39

9.7Precautions on ordering cables/cords

On ordering the cables and cords, the following-listed precautions shall be observed.

Cables and cords applied shall be those specified in the instruction manual.

When the cable contractor is named, and when the cables specified in the instruction manual cannot be adopted, use the cables having the same characteristics with those specified in the instruction manual. In that case, particularly the following-listed characteristics shall be checked.

Core diameter/Clad diameter, Transmission band, Applied wavelength, Aperture rate, Attenuation

*If the judgement is difficult to give, please contact our section in charge of the matter.

Cable contractors shall be unified. For example, separate the cable contractor and the connector-mounting contractor should be avoided because there is no responsible contractor on accident.

Delivery of optical fiber cables take a time compared with ordinary wire cables. Therefore, order shall be made with a sufficient margin of time.

38

ASC25 Instruction Manual

Image 39
Contents 3 B 0 3 6 TOSLINE-S20Table of Contents Precautions on ordering cables/cords Introduction Page Overview Page System Configurations Page Outline of Functions Page Specifications Page External dimensions HardwareProduct construction Component identification TX1 Function setting switchPage LED display PowerOptical connector Terminal block Fuse holder Start up and Power down methods Power down methodStart up method Page Precautions on using Active Star Coupler Page Method for mounting the main unit Installation and WiringRecommended mounting position Connection of optical fiber cables cords Method for connecting an Active Star Coupler with stationsOptical parts DCV-HC-20/07 Optical connector CF-2001H Cord length Edge position of F07 Type connector Precautions on handling optical fiber and optical connectorTosline S20 10 Removal of housing Method of F07optical connector assembly13 Residual length of core cover Page Plug-holding cap Spring Procedure of design for laying optical fiber cables Transmission side end Precautions on ordering cables/cords Precautions on laying cables