(3)List of
Name | Model, Rating | Use |
Optical fiber cable | (Main line cable) | |
(Standard optical fiber | (¨¨ denotes cable total length.) | |
cable) |
| (nn denotes exposed cord length.) |
Optical fiber cable with | (Cord with connector on one end) | |
optical connector | 20/07 | (¨¨ denotes cord length.) |
(Standard optical fiber |
|
|
(Cord with connector on both ends) | ||
cord) | 20/07 | (¨¨ denotes cord length.) |
Aligner | (Connection of optical connectors) | |
| Table 9.3 |
|
9.4Precautions on handling optical fiber and optical connector
Since optical fibers are finely finished parts and are made of glass, handling of them shall be done with special care emphasizing the following.
(1)Do not damage and contaminate the edge faces of optical connector. Damage or attached dust on the edge of optical connector increase the connection loss. If the edge of optical connector is contaminated, remove the contaminants from the edge.
Key to prevent insertion error
Edge
Figure 9.8 Edge position of F07 Type connector
30 | ASC25 Instruction Manual |