5 APPENDIX
Default Setting List
The
The default setting values are the ones set at the factory when this equipment is shipped. You can see the current setting values by printing the "Configuration Page" from the opera- tion panel of this equipment. See the following page for how to print the "Configuration Page".
Setup Guide for Printing Functions Chapter 4 "PRINTING LISTS (EQUIPMENT)"
To Print List "Configuration page"
Default settings for network setting
General
Link Speed/Duplex Mode ........................................... Auto
TCP/IP
Address Mode | Dynamic |
IP Address | Undefined |
Subnet Mask | Undefined |
Default Gateway | Undefined |
IPX/SPX
Enable IPX/SPX | Enable |
Frame Type | Auto Sense |
AppleTalk
Enable AppleTalk | Enable |
Device Name | MFP_[NIC Serial Number] |
Desired Zone | * |
DNS session
Enable DNS | Enable |
Primary DNS Server Address | 0.0.0.0 |
Secondary DNS Server Address | 0.0.0.0 |
DDNS session
Enable DDNS | Enable |
Host Name | |
Domain Name | Undefined |
36 Default Setting List