Toshiba B-SA4TM-GS12-QM-R, B-SA4TP manual „ Serial RS-232C Interface Data Length, Stop Bit, Parity

2. PRINTER SETUP

ENGLISH VERSION EO1-33048

2.7 Setting an Operating Environment

2.7.2Parameter Setting (Cont.)

„Serial (RS-232C) Interface

(2) Data Length

This parameter is to choose a data length of the RS-232C interface.

As “8 bits” has been chosen as default, change it in accordance with your PC.

		<2>PARAMETER SET
		DATA LENG. 8bits
[RESTART]		DATA LENG. 8bits
	[FEED]	DATA LENG. 7bits

After making a choice, press the [PAUSE] key.

(3) Stop Bit

This parameter is to choose a stop bit of the RS-232C interface.

As “1 bit” has been chosen as default, change it in accordance with your PC.

		<2>PARAMETER SET
		STOP BIT 1bit
[RESTART]		STOP BIT	1bit
	[FEED]	STOP BIT	2bits

After making a choice, press the [PAUSE] key.

(4) Parity

This parameter is to choose a parity of the RS-232C interface.

As “None” has been chosen as default, change it in accordance with your PC.

<2>PARAMETER SET PARITY NONE

PARITY EVEN

[RESTART]

PARITY ODD

[FEED]

PARITY NONE

After making a choice, press the [PAUSE] key.

E2-20