Toshiba B-SA4TM-GS12-QM-R, B-SA4TP, BSA4TMGS12QMR manual Product Overview, Introduction Features

1. PRODUCT OVERVIEW

ENGLISH VERSION EO1-33048

1.1 Introduction

1. PRODUCT OVERVIEW

1.1 Introduction

Thank you for choosing the TOSHIBA B-SA4TP series thermal printer. This Owner’s Manual contains from general set-up through how to confirm the printer operation using an online test print, and should be read carefully to help gain maximum performance and life from your printer. For most queries please refer to this manual and keep it safe for future reference. Please contact your TOSHIBA TEC representative for further information concerning this manual.

1.2 Features	This printer has the following features:
	• Space-saving design
	An area required to place a printer is about A4 size, in spite of both
	media and ribbon being loaded inside it. Also, the Top Cover is opened
	upward, which saves the installation space.
	The optional cutter module and strip module are as slim and small as
	the Front Cover.
	• Various kinds of interface
	Various kinds of interface are provided:
	<Standard>		<Option>
	• Parallel		• Serial
	• USB		• Wireless LAN
	• Built-in LAN		• RFID
	• Superior hardware
	Clear print is realized by an 8 dots/mm (203 dpi) (B-SA4TP-GS12) or
	11.8 dots/mm (300 dpi) (B-SA4TP-TS12) print head, at a printing
	speed of 50.8 mm/sec. (2 inches/sec.), 101.6 mm/sec. (4 inches/sec.), or
	152.4 mm/sec. (6 inches/sec.)
	• Easy maintenance
	Design of the printer is simple. Especially, attachment and removal of
	the print head and platen are very simple, which makes maintenance
	easy.
	• A variety of options
	The following optional devices are available:
	•	Cutter module
	•	Strip module
	•	Serial interface board
	•	Wireless LAN board
	•	RFID module
	•	300-dpi print head

E1- 1