APPENDIX 1 MESSAGES AND LEDS
ENGLISH VERSION
APPENDIX 1 MESSAGES AND LEDS
APPENDIX 1 MESSAGES AND LEDS
Appendix 1 describes the LCD messages displayed on the operation panel.
Symbols in the message
1:: The LED is illuminated. ~: The LED is flashing. z: The LED is unlit.
2:****: the number of unprinted media. Up to 9999 (in pieces)
3:###: Flash memory card remaining memory for PC save area: 0 to 895 (in K bytes)
4:&&&&: Remaining flash memory capacity for storing writable characters 0 to 3147 (in K bytes)
|
|
| LED Indication |
| Restoration by | Acceptance of | |
No. | LCD Message |
|
| Printer Status | RESTART key | Status Request | |
|
| ||||||
|
|
| ONLINE | ERROR |
| Yes/No | Reset Command |
|
|
|
| Yes/No | |||
1 | ON LINE |
| | z | Online mode | Yes | |
| ON LINE |
| ~ | z | Online mode (communicating) | Yes | |
2 | HEAD OPEN |
| z | z | The Top Cover is opened in online mode. | Yes | |
3 | PAUSE **** |
| z | z | Pause state | Yes | Yes |
|
|
|
|
| A parity, overrun, or framing error has | Yes | Yes |
4 | COMMS ERROR | z | | occurred during a communication by RS- |
|
| |
|
|
|
|
| 232C. |
|
|
5 | PAPER JAM | **** | z | | A paper jam has occurred during paper | Yes | Yes |
feed. |
|
| |||||
6 | CUTTER ERROR**** | z | | A problem has occurred at the cutter | Yes | Yes | |
module. |
|
| |||||
7 | NO PAPER | **** | z | | The media has run out, or the media is not | Yes | Yes |
loaded properly. |
|
| |||||
|
|
|
|
| A feed or an issue was attempted with the | Yes | Yes |
8 | HEAD OPEN | **** | z | | Top Cover opened. (Except when the |
|
|
|
|
|
|
| [FEED] key is pressed.) |
|
|
9 | HEAD ERROR | z | | The print head has a problem. | Yes | Yes | |
10 | EXCESS HEAD TEMP | z | | The print head is overheated. | No | Yes | |
|
|
|
|
| • The ribbon has run out. | Yes | Yes |
11 | RIBBON ERROR**** | z | | • The ribbon has been torn. A problem has |
|
| |
|
|
|
|
| occurred with the sensor that determines |
|
|
|
|
|
|
| the torque for the ribbon motor. |
|
|
12 | COVER OPEN **** | z | | A feed or printing was attempted with the | Yes | Yes | |
Front Cover opened. |
|
| |||||
13 | SAVING ####&&&& | | z | In writable character or PC command save | Yes | ||
|
|
|
|
| mode |
|
|
14 | FLASH WRITE ERR. | z | | An error has occurred in writing to the flash | No | Yes | |
ROM. |
|
| |||||
15 | FORMAT ERROR | z | | An error has occurred in formatting the | No | Yes | |
flash ROM. |
|
| |||||
16 | FLASH CARD FULL | z | | Saving failed because of an insufficient | No | Yes | |
capacity of the flash ROM. |
|
| |||||
17 | Display of error | z | | A command error has occurred in analyzing | Yes | Yes | |
| message (See Note.) |
|
| the command. |
|
| |
18 | POWER FAILURE | z | | A momentary power failure has occurred. | No | No | |
19 | INTIALIZING… | z | z | The flash ROM is being initialised. | |||
20 | EEPROM ERROR | z | | Data cannot be read from/written to a | |||
|
|
|
|
| backup EEPROM properly. |
|
|
EA1- 1