Toshiba B-SA4TM-GS12-QM-R, B-SA4TP, BSA4TMGS12QMR manual Example of Cut Position Fine Adjustment

2. PRINTER SETUP

ENGLISH VERSION EO1-33048

2.10 Position and Print Tone Fine Adjustment

2.10 Position and Print

Tone Fine

Adjustment (Cont.)

Cut/Strip Position Fine Adjustment

NOTES:

Choose a desired value by using the [RESTART] or [FEED] key.

Pressing the [FEED] key one time causes a –0.1mm change, up to –50.0 mm.

Pressing the [RESTART] key one time causes a +0.1mm change, up to +50.0 mm.

[RESTART]

[FEED]

<3>ADJUST SET CUT ADJ. +10.0mm

CUT ADJ.+50.0mm

CUT ADJ.+49.9mm

CUT ADJ.+0.1mm

CUT ADJ.+0.0mm

CUT ADJ.-0.1mm

CUT ADJ.-49.9mm

CUT ADJ.-50.0mm

After selecting a fine adjustment value, press the [PAUSE] key.

•Example of Cut Position Fine Adjustment

When setting +3.0 mm

Compared with “+0.0mm” position, the cut position is shifted forward.

Feed Direction

3mm

When setting +0.0 mm

Feed Direction

Cut Position

When setting –3.0 mm

Compared with “+0.0mm” position, the cut position is shifted backward.

Cut Position

3mm

Feed Direction

Cut Position

E2-53