16.Click [Finish].
• Start copying files.
17.The installation is completed.
NOTE: • Before using the printer driver for printing, please configure the installed options of the equipment and department code (if required) on the printer driver.
P.204 "Before Using the Printer Driver"
Installing the Client Software for Peer-to-Peer Printing
This section describes how to set up the client software for
You can set up the printer drivers for
PREPARATION: • Before operating the following setup, check with your system administrator to make sure of the following:
-This equipment is connected to the network and turned on.
-The TCP/IP setting is correct on this equipment and your computer.
NOTE: •
Installation and Configuration of Peer-to-Peer Utility
Install the printer driver using the installer in the Client1
Installing the
1.Install the client software using the installer in the Client1
•Please install the client software following the instruction of the instal- lation for parallel printing.
P.25 "Installation for Parallel Printing Using the Installer"
118 | Printing Guide — Installing Client Software for Windows |