Toshiba e-Studio 350, 200L, 280, 230L, 3511 manual PS Specific Options, Black Over Print

If the banner paper source is not specified the PCL5e auto paper source command “<esc>&l7H” will be sent. The banner page source cannot be set to manual feed. The paper size always has priority over the paper source.

Example: The command to specify that the banner page paper source is the LCF is “lp –o btandem filename”.

Banner Media Type

The banner page paper source can also be selected using the media type using the following option.

Option Value	Alternate	Description
	Value
bmtype=Plain		The paper source that contains Plain1 paper is requested.
1
bmtype=Tran		The paper source that contains transparency slides is requested.
sparency
bmtype=Thic		The paper source that contains Thick1 paper is requested.
k1
bmtype=Thic		The paper source that contains Thich2 paper is requested.
k2
bmtype=Thic		The paper source that contains Thich3 paper is requested.
k3

The paper size always has priority over the media type and the paper source.

If this option is not specified the command will not be sent so the printer’s default value will be used to print the banner page.

The command to specify that the banner page should print on a colored media type is “lp –o bmtype=Plain1 filename”.

PS Specific Options

Some of the options only apply to the PS files.

— Black Over Print

The black over print mode can be set using the following option.

Option Value	Alternate	Description
	Value
blackoverprint		Disable the black over print mode.
=0
blackoverprint		Enable the black over print mode.
=1

Example: The command to set the black over print mode is “lp –o blackoverprint=1 filename”.

For e-STUDIO450 Series and e-STUDIO280 Series:

The “Black Over Print” option is not available for e-STUDIO450 Series and e-STUDIO280 Series.

Printing Guide — Printing from UNIX 323