8.Make sure the created LPR port is checked in the “Print to the following port” list and click [OK] to save settings.
NOTE: • Before using the printer driver for printing, please configure the installed options of the equipment and department code (if required) on the printer driver.
P.204 "Before Using the Printer Driver"
— Windows 2000/XP/Server 2003
Configuring the LPR port for Windows 2000/XP/Server 2003
The following describes an installation on Windows 2000. The procedure is the same when Windows XP or Windows Server 2003 is used.
1.Install the client software using the installer in the Client1
•Please install the client software following the instruction of the instal- lation for parallel printing.
P.25 "Installation for Parallel Printing Using the Installer"
2.After installing the client software, click [Start], select [Set- tings], and click [Printers] to open the Printers folder.
Printing Guide — Installing Client Software for Windows | 69 |