•Document has been printed successfully — Check this to notify you when the printer is finished printing the document.
•Private print document is being held — Check this to notify you when a private print job that you have sent is ready for you to walk over to the printer and release.
•Proof set has been printed — Check this to notify you when the printer has printed the first copy of your
•Fax has been transmitted successfully — Check this to notify you when the printer has sent a fax when you have sent using the
•Document has been cancelled by the printer — Check this to notify you when the printer has cancelled the job. This can happen when a paper size is not available and the timeout has expired. This event occurs only when catastrophic circumstances force the printer to cancel the job, such as a missing byte or memory failure. Expired private print or proof print jobs are never cancelled by the printer.
•Document cannot be printed due to error — Check this to notify you when the printer is unable to print the job.
•Printer has a paper jam — Check this to notify you when there is a paper jam in the printer.
•Printer is offline — Check this to notify you when the printer is off line. This is only available for
•Drawer is out of paper — Check this to notify you when one of the printer drawers is out of paper. This drawer may not be the drawer the printer is using for your job.
•Printer door is open — Check this to notify you when the cover on the printer is open.
•Printer requires attention — Check this to notify you when the printer requires imme- diate attention.
•Toner is Empty — Check this to notify you when a toner is empty.
•Used Toner Container is full — Check this to notify you when the used toner container is full.
2)Method
This sets how TopAccessDocMon notifies you when events occur.
•Popup Dialog — Check this for a popup dialog box.
•Audio (Beep) — Check this for a beep sound.
—Changing the Refresh Rate
The Refresh Rate tab lets you change the refresh rate for document notification, printer status, and print queue.
1
2 | 3 |
1)Item/Refresh Rate
This list displays the refresh rate settings for each item. You can change the refresh rate by selecting the item in this list and clicking [Change Rate...].
Printing Guide — Monitoring Print Jobs with TopAccessDocMon | 331 |