Toshiba 280, 200L, 230L, 3511 PCL5e Specific Options, Text Wrapping, Left Margin, Right Margin

Example: The command to set the pure black mode is “lp –o pureblackgray=1 filename”.

For e-STUDIO450 Series and e-STUDIO280 Series:

The “Pure Black and Pure Gray” option is not available for e-STUDIO450 Series and e-STUDIO280 Series.

PCL5e Specific Options

Some of the options only apply to plain text or PCL5e files.

— Text Wrapping

The following options control text wrapping when it reaches the right margin.

Option Value	Alternate	Description
	Value
wrap		Enable automatic text wrapping.
nowrap		Disable automatic text wrapping.

If this option is not specified the command will not be sent so the printer’s default value will be used.

Example: The command to specify wrapping is “lp –o wrap filename”.

— Left Margin

The left margin position can be specified with the following option.

Option Value	Alternate	Description
	Value
lm=value		Set the left margin to value columns.

If the left margin is set to the right of the right margin it will be ignored.

If this option is not specified the command will not be sent so the printer’s default value will be used.

Example: The command to set the left margin to five columns is “lp –o lm=5 filename”.

— Right Margin

The right margin position can be specified with the following option.

Option Value	Alternate	Description
	Value
rm=value		Set the right margin to value columns.

If the right margin is set to the left of the left margin or if it is set to a position wider than the log- ical page it will be ignored. The right margin is specified in columns from the left margin. A negative value will be ignored.

If this option is not specified the command will not be sent so the printer’s default value will be used.

Example: The command to set the right margin to fifty columns is “lp –o rm=50 filename”.

320 Printing Guide — Printing from UNIX