Option Value | Alternate | Description |
| Value |
|
|
|
|
|
|
|
private=din |
| Process as a private print job. The din is |
|
| number. |
|
|
|
If this option is not specified, the printer’s default value will be used.
— Department Code
The department access code can be set using the following option.
Option Value | Alternate | Description |
| Value |
|
|
|
|
|
|
|
dept=code |
| Set the department access code. The code is a |
|
| value. |
|
|
|
SUPPLEMENT: • How the equipment performs printing for an invalid department code print job, which no department code or invalid department code is specified, varies depending on the Department Code Enforcement setting that can be set from TopAccess Adminis- trator mode. When the Department Code Enforcement is enabled, the invalid department code print job will be stored in the invalid department code print job list without printing. When the Department Code Enforcement is disabled, the invalid department code print job will be printed.
— Smoothing
The smoothing mode can be set using the following option.
Option Value | Alternate | Description |
| Value |
|
|
|
|
|
|
|
smoothing= | ON | Set the smoothing mode. |
on |
|
|
|
|
|
smoothing= | OFF | Cancel the smoothing mode. |
off |
|
|
|
|
|
Example: The command to set the smoothing mode is “lp
— Distinguish Thin Lines
The thin line limit mode can be set using the following option.
Option Value | Alternate | Description |
| Value |
|
|
|
|
|
|
|
thinlinelimit= | ON | Set the thin line limit mode. |
on |
|
|
|
|
|
thinlinelimit= | OFF | Cancel the thin line limit mode. |
off |
|
|
|
|
|
Example: The command to set the thin line limit mode is “lp
Printing Guide — Printing from UNIX | 315 |