• The Installable Options window is displayed.
3.Set the following options.
— Finisher
Not Installed — Select this if a finisher is not installed.
Single Position Stapler — Select this when the
Job Separator — Select this when the Job Separator (only for
Offset Tray — Select this when the Offset Tray (only for
— Lower Drawer (only for
Not Installed — Select this when the Lower Drawer is not installed. Installed — Select this when the Lower Drawer is installed.
— Pedestal
Not Installed — Select this when no pedestal is installed.
Pedestal 1 — Select this when the Paper Feed Pedestal is installed.
Pedestal 2 — Select this when the Paper Feed Pedestal and Drawer Module are installed.
LCF — Select this when the Large Capacity Feeder is installed.
— ADU (only for
Not Installed — Select this when the ADU is not installed. Installed — Select this when the ADU is installed.
NOTE: • If you are using the Mac OS X 10.3.0 or earlier, finisher options such as stapling and hole punching can be selected even if you select “Not Installed” for the Finisher option. If you select the finisher options for printing but the finisher is not installed, finisher settings will be ignored and perform printing correctly.
Printing Guide — Installing Client Software for Macintosh | 183 |