Toshiba 200L Changing the Default Values, If the above file exists, enter the following command

11.If the above file exists, enter the following command.

/opt/toshiba/tap/bin/printconf_import \ –a <queue name> IP_ADDRESS \

rm /opt/toshiba/tap/bin/flag_<queue name>

12.Restart your lpd.

Creating a print queue manually on OpenUnix

1.Log on to the root account.

2.Open your Linux/Unix editor.

3.Create the following file.

/etc/lp/interfaces/<queue name>.conf

4.Add a line as below in the <queue name>.conf. dest=<IP address>

5.Save the file.

6.Enter the following command:

chmod +x <queue name>.conf

7.Enter the following command: chown lp:lp <queue name>.conf

8.Enter the following command:

For e-STUDIO4511 Series

lpadmin -p <queue name> -v /dev/null -I any \ -i /usr/lib/lp/model/net_est4511

For e-STUDIO450 Series and e-STUDIO280 Series

lpadmin -p <queue name> -v /dev/null -I any \ -i /usr/lib/lp/model/net_estbw

9.Enter the following command: accept <queue name>

10.Enter the following command: enable <queue name>

Changing the Default Values

You can change the default values of a print queue by the following procedure.

192 Printing Guide — Installing Client Software for UNIX