Toshiba 3511, 200L, 280, 230L, e-Studio 350 manual Unit, Paper Source, Paper Type

Unit

Select the unit for the Tab Extension and Image Shift option. The default unit varies depend- ing on the regional setting of the client computer.

NOTES: • The tab paper can be fed only from the Bypass Tray. When you enable tab printing, place the tab paper on the Bypass Tray. When you place the tab paper on the Bypass Tray, make sure the tab side of the paper becomes outside.

Place the tab paper so that the tab side becomes outside.

•If the document for tab printing is not created properly or the Image Shift Width is not set properly, the image will not be printed in the correct position within the tab extension. Please make sure to create the document and set the Image Shift Width correctly.

•If mis-printing occurs while multiple tab pages are printed continuously, dirt may adhere to the reverse side of a paper. To avoid this, it is recommended to print a tab paper as a separated job for each page so that this equipment performs cleaning before printing next tab paper.

•When printing tab paper, the tab paper may be caught in the exit in the inner tray because the roller to deliver the tab extension does not exit. In that case, remove the tab paper before printing a next job.

4)Paper Source

This selects the paper source. Please select a paper source that correlates with the printing size.

•Automatic — Automatically selects the paper set in this equipment according to the printed document size.

•Upper Drawer — Paper is fed from the Upper Drawer.

•Lower Drawer — Paper is fed from the Lower Drawer.

•Pedestal Upper Drawer — Paper is fed from the Pedestal Upper Drawer. This cannot be selected if a Pedestal 1 or 2 are not installed.

•Pedestal Lower Drawer — Paper is fed from the Pedestal Lower Drawer. This cannot be selected if a Pedestal 2 is not installed.

•Large Capacity Feeder — Paper is fed from the Large Capacity Feeder. This cannot be selected if a Large Capacity Feeder is not installed.

•Sheet Feed Bypass — Paper is fed from the Bypass Tray.

NOTE: • The selectable values vary depending on the optional devices installed on this equipment and their configuration on the Configuration tab.

5)Paper Type

This sets the media type of the paper.

•Plain — Select this when printing on 20 lbs plain paper (64-80 g/m2 plain paper).

•Thick1 — Select this when printing on 24-28 lbs thick paper (81-105 g/m2 thick paper).

•Thick2 — Select this when printing on 32-90 lbs thick paper (106-163 g/m2 thick paper).

•Thick3 — Select this when printing on 110 lbs thick paper (164-209 g/m2 thick paper).

220 Printing Guide — Printing from Windows