![](/images/new-backgrounds/1119906/11990643x1.webp)
4.Select the equipment that you want to connect and click [OK].
5.It automatically obtain the network queue in the “Network path or queue name” field.
NOTE: • It automatically obtains the IP address of the equipment and the queue name speci- fied by an administrator, in the “Network path or queue name” field in the General submenu page of the Setup menu in the TopAccess administrator mode. If you can- not obtain the queue name, ask your administrator that the “Network path or queue name” field is correctly specified.
6.Continue the installation from step 10 on page 16.
Installing from TopAccess
If the system administrator has uploaded the software to this equipment, you can use TopAccess to install the software on your workstation.
22 | Network Fax Guide — Installing Network Fax Software |