D-Link DVG-6008S user manual Phone Book, Speed Dial

Page 42

Phone Book

This system can set up and store 100 phone numbers into a phone book and provides an IP address query when calling to other gateway(s). If no Phone books manager is set within a gateway group, then all Gateway systems have to set up phone data for each the gateway to communicate with each other.

Gateway Name: Enter other gateways’ code or an easy-to-remember name.

Gateway Number: Enter the desired number of other Gateways.

IP/Domain Name: Enter the IP address or URL (Uniform Resource Locator) of other gateways.

Port: Enter other Gateways’ listen port.

Speed Dial

It can set up 100 numbers for speed dialing. Setting methods are as follows.

Method 1- Single mapping: Fill a short code into the “Speed Dial Code” column, and enter the desired phone number into the “Number To Dial” column.

For example, pick up the handset and dial 55＃ and the system will dial 32568791.

Method 2- Multi mapping; Fill the prefix code into the ” Speed Dial Code” column and the format to transfer into the “Number To Dial” column.

For example, pick up the handset and dial 301＃, and the system will dial 521301.

If the user dial 00 1657987456321, the system will DIAL 856 1657987456321

Image 42

Contents DVG-6008S Voip Gateway Page Contents Advanced Feature IP Sharing Functions Coding PrincipleIntroduction Product OverviewHardware Description Front Panel Rear Panel DVG-6008S ModelNetwork Interface Gateway Assigned with a Public IP AddressGateway in a NAT network Page Telephone Interface Description Integrating Line Ports with PBXBasic Settings of a Gateway PreparationIVR Interactive Voice Response Instructions Save SettingsSoftware Upgrades To inquire about current Gateway’s WAN Port IP addressIVR Functions Table Function Code Description Example Function Code Description Example Subnet Mask Settings Static IP Settings Function Command Select a Static IPIP address Settings Default Gateway SettingsRecorded Voice File Adsl PPPoE SettingsPPPoE Account Settings Select a PPPoEPPPoE Character Conversion Table Network Settings WAN InstructionsPage Setting Static IP IP Configuration Setting WAN PortSetting Dynamic IP Dhcp Adsl PPPoE SettingsDNS Settings BigPond for Australia use onlyClone MAC Using Phone Books Manager Network Settings LAN LAN interface mode※LAN IP/Subnet mask Dhcp Settings QoS Settings WAN QoSLAN QoS※ NAT/DDNS NAT TraversalDdns Example Telephony SettingsPrefix Number Rules For exampleHotline Functions Example Description SIP 164 System FXO Representative number registers to Proxy Each line registers to Proxy independentlyCalling Features Advanced Options Line Settings Fax Settings CodecPage Digit Map Phone Book Speed DialCDR Settings Caller FilterACL for Management Language Transit Call ControlLong-Distance Control Table Long Distance Exception TableUDT Detection CPT/Cadence SettingsBusy Tone Cadence Measurement CPT parameters TableDetailed description is given below Direct Connection to Pstn Connected to a PBX Extension Line Page Save Settings Filling in the CPT TableSystem Information RTP Packet Summary Stun InquiryPing Test Backup/Restore SnmpProvision Settings System Operations Save SettingsSoftware Upgrade LogoutIP Sharing Functions Select TCP/IP, and then click Properties Page Instruction Dialed Number Processing FlowEnd Static Route※ RIPRouting Information Protocol ※Port filtering IP FilteringMAC Filtering Virtual ServerURL Filter※ Special Applications※DoS Prevention Settings※