D-Link DVG-6008S user manual Advanced Options

Page 37

35

Advanced Options

There are two levels to enter Web. Administrator is able to change all settings. Web UI only changes some settings.

NOTE: Enter new Login ID and password for two levels.

Web UI auto log out: When logging in a web page, if a user does not act within the effective time range, the user will be disconnected from the web page to allow others to login.

Dial Wait Timeout: Use it to set the waiting time for the user’s first key pressing when dialing a number. The user will hear a busy tone if he/she does not press the first key within the set time frame.

Inter Digits Timeout: Set the waiting time between each key pressing. The inputted numbers will be dialed after the timeout.

Minimum DTMF ON Length (Dial on)/ Minimum DTMF OFF Length (Dial off - between tones): Used to set dial tone when a call is being diverted to another extension.

DTMF Detection Sensitivity: Used to adjust the sensitivity of the telephone keys.

FXO Dial Type: Choose dialing type of FXO. There are DTMF and Pulse. ※

Pulse Dial Mark/Space Ratio: Duration and break of pulse dial ration. ※

FXO Impedance: Choose correct impedance in your country/area. ※

Image 37

Contents DVG-6008S Voip Gateway Page Contents IP Sharing Functions Coding Principle Advanced FeatureProduct Overview IntroductionHardware Description Front Panel DVG-6008S Model Rear PanelGateway Assigned with a Public IP Address Network InterfaceGateway in a NAT network Page Integrating Line Ports with PBX Telephone Interface DescriptionPreparation Basic Settings of a GatewayIVR Interactive Voice Response Software Upgrades Save SettingsInstructions To inquire about current Gateway’s WAN Port IP addressIVR Functions Table Function Code Description Example Function Code Description Example IP address Settings Static IP Settings Function Command Select a Static IPSubnet Mask Settings Default Gateway SettingsPPPoE Account Settings Adsl PPPoE SettingsRecorded Voice File Select a PPPoEPPPoE Character Conversion Table Instructions Network Settings WANPage Setting Dynamic IP Dhcp IP Configuration Setting WAN PortSetting Static IP Adsl PPPoE SettingsBigPond for Australia use only DNS SettingsClone MAC Using Phone Books Manager LAN interface mode※ Network Settings LANLAN IP/Subnet mask Dhcp Settings WAN QoS QoS SettingsLAN QoS※ NAT Traversal NAT/DDNSDdns Prefix Number Rules Telephony SettingsExample For exampleHotline Functions Example Description SIP 164 System Each line registers to Proxy independently FXO Representative number registers to ProxyCalling Features Advanced Options Line Settings Codec Fax SettingsPage Digit Map Speed Dial Phone BookCaller Filter CDR SettingsACL for Management Transit Call Control LanguageLong Distance Exception Table Long-Distance Control TableBusy Tone Cadence Measurement CPT/Cadence SettingsUDT Detection CPT parameters TableDetailed description is given below Direct Connection to Pstn Connected to a PBX Extension Line Page Filling in the CPT Table Save SettingsSystem Information Stun Inquiry RTP Packet SummaryPing Test Snmp Backup/RestoreSystem Operations Save Settings Provision SettingsLogout Software UpgradeIP Sharing Functions Select TCP/IP, and then click Properties Page Dialed Number Processing Flow InstructionEnd RIPRouting Information Protocol ※ Static Route※IP Filtering Port filteringVirtual Server MAC FilteringSpecial Applications※ URL Filter※DoS Prevention Settings※