D-Link DVG-6008S user manual

Page 9

7

Gateway assigned with a Public IP Address and serving as an IP sharing device

The gateway will have a Public IP address regardless of whether it is a static IP application, DHCP (using a Cable Modem), or PPPoE (To connect to your ADSL account), which can then use the functions of built-in IP sharing function to allow other PCs to be on-line at the same time.

Gateway IP Settings

Need to be set up as static IP, DHCP,

 

 

or PPPoE

 

NAT/STUN Settings

Unnecessary (Disabled)

 

 

 

 

DDNS Settings

Unnecessary (Disabled)

 

 

 

 

For settings at PC end,

PC uses a static IP address ranging

 

please refer to section “IP

from: 192.168.8.1-192.168.8.253

 

sharing functions”

Subnet Mask255.255.255.0

 

 

Default Gateway192.168.8.254

 

 

 

 

Image 9
Contents DVG-6008S Voip Gateway Page Contents IP Sharing Functions Coding Principle Advanced FeatureProduct Overview IntroductionHardware Description Front Panel DVG-6008S Model Rear PanelNetwork Interface Gateway Assigned with a Public IP AddressGateway in a NAT network Page Integrating Line Ports with PBX Telephone Interface DescriptionBasic Settings of a Gateway PreparationIVR Interactive Voice Response Software Upgrades Save SettingsInstructions To inquire about current Gateway’s WAN Port IP addressIVR Functions Table Function Code Description Example Function Code Description Example IP address Settings Static IP Settings Function Command Select a Static IPSubnet Mask Settings Default Gateway SettingsPPPoE Account Settings Adsl PPPoE SettingsRecorded Voice File Select a PPPoEPPPoE Character Conversion Table Instructions Network Settings WANPage Setting Dynamic IP Dhcp IP Configuration Setting WAN PortSetting Static IP Adsl PPPoE SettingsDNS Settings BigPond for Australia use onlyClone MAC Using Phone Books Manager Network Settings LAN LAN interface mode※LAN IP/Subnet mask Dhcp Settings QoS Settings WAN QoSLAN QoS※ NAT Traversal NAT/DDNSDdns Prefix Number Rules Telephony SettingsExample For exampleHotline Functions Example Description SIP 164 System Each line registers to Proxy independently FXO Representative number registers to ProxyCalling Features Advanced Options Line Settings Codec Fax SettingsPage Digit Map Speed Dial Phone BookCDR Settings Caller FilterACL for Management Transit Call Control LanguageLong Distance Exception Table Long-Distance Control TableBusy Tone Cadence Measurement CPT/Cadence SettingsUDT Detection CPT parameters TableDetailed description is given below Direct Connection to Pstn Connected to a PBX Extension Line Page Filling in the CPT Table Save SettingsSystem Information RTP Packet Summary Stun InquiryPing Test Snmp Backup/RestoreSystem Operations Save Settings Provision SettingsLogout Software UpgradeIP Sharing Functions Select TCP/IP, and then click Properties Page Dialed Number Processing Flow InstructionEnd RIPRouting Information Protocol ※ Static Route※IP Filtering Port filteringVirtual Server MAC FilteringSpecial Applications※ URL Filter※DoS Prevention Settings※