D-Link DVG-6008S user manual IP Sharing Functions

Page 57

55

5. IP Sharing Functions

All Gateway series have a built-in IP sharing function. The settings and instructions at a PC end are described below:

Current Intranet only supports static IP mode, and the settings at the PC end are as follow: Available IP address Range : 192.168.8.1 – 192.168.8.253 (default address of Gateway is 192.168.8.254)

Subnet Mask	: 255.255.255.0
Default Gateway	: 192.168.8.254

The above values vary with different LAN Port Settings.

Assume Gateway’s LAN settings are,

IP address : 192.168.3.1

Subnet Mask

: 255.255.255.0

Then, the settings at PC end should be as follows:

Valid IP address range : 192.168.3.2 – 192.168.3.254

Subnet Mask	: 255.255.255.0
Default Gateway	: 192.168.3.1

WAN Port	LAN Port connected to
Connected to	Intranet
Internet

Image 57

Contents DVG-6008S Voip Gateway Page Contents IP Sharing Functions Coding Principle Advanced FeatureProduct Overview IntroductionHardware Description Front Panel DVG-6008S Model Rear PanelNetwork Interface Gateway Assigned with a Public IP AddressGateway in a NAT network Page Integrating Line Ports with PBX Telephone Interface DescriptionBasic Settings of a Gateway PreparationIVR Interactive Voice Response Software Upgrades Save SettingsInstructions To inquire about current Gateway’s WAN Port IP addressIVR Functions Table Function Code Description Example Function Code Description Example IP address Settings Static IP Settings Function Command Select a Static IPSubnet Mask Settings Default Gateway SettingsPPPoE Account Settings Adsl PPPoE SettingsRecorded Voice File Select a PPPoEPPPoE Character Conversion Table Instructions Network Settings WANPage Setting Dynamic IP Dhcp IP Configuration Setting WAN PortSetting Static IP Adsl PPPoE SettingsDNS Settings BigPond for Australia use onlyClone MAC Using Phone Books Manager Network Settings LAN LAN interface mode※LAN IP/Subnet mask Dhcp Settings QoS Settings WAN QoSLAN QoS※ NAT Traversal NAT/DDNSDdns Prefix Number Rules Telephony SettingsExample For exampleHotline Functions Example Description SIP 164 System Each line registers to Proxy independently FXO Representative number registers to ProxyCalling Features Advanced Options Line Settings Codec Fax SettingsPage Digit Map Speed Dial Phone BookCDR Settings Caller FilterACL for Management Transit Call Control LanguageLong Distance Exception Table Long-Distance Control TableBusy Tone Cadence Measurement CPT/Cadence SettingsUDT Detection CPT parameters TableDetailed description is given below Direct Connection to Pstn Connected to a PBX Extension Line Page Filling in the CPT Table Save SettingsSystem Information RTP Packet Summary Stun InquiryPing Test Snmp Backup/RestoreSystem Operations Save Settings Provision SettingsLogout Software UpgradeIP Sharing Functions Select TCP/IP, and then click Properties Page Dialed Number Processing Flow InstructionEnd RIPRouting Information Protocol ※ Static Route※IP Filtering Port filteringVirtual Server MAC FilteringSpecial Applications※ URL Filter※DoS Prevention Settings※