D-Link DVG-6008S user manual Snmp, Backup/Restore

Page 54

SNMP

Enable SNMP Agent: Enable SNMP if ticked.

Get/Set/Trap Community: Enter Community name to Read, Write and Trap.

Trap Host: Enter the IP of Trap Host.

NTP

This is the time setting. After the gateway is on the Internet, it will set its watch with Time Server.

Time Zone: Set the Time Zone where the gateway resides.

Time Server #1~#3: Set the Time Server where the gateway should sync up during start up. (NTP protocol)

Backup/Restore

You can backup settings to a file and restore settings from that file. You also can restore all settings back to default by selecting Restore Default Configurations and click Restore.

Note: It needs to Save Settings and Restart, and all settings will back up default settings or have new setting that you upload.

Configuration File: Backup the all settings.

Configuration Template File: Backup the settings as template file for editing.

Image 54

Contents DVG-6008S Voip Gateway Page Contents Advanced Feature IP Sharing Functions Coding PrincipleIntroduction Product OverviewHardware Description Front Panel Rear Panel DVG-6008S ModelNetwork Interface Gateway Assigned with a Public IP AddressGateway in a NAT network Page Telephone Interface Description Integrating Line Ports with PBXBasic Settings of a Gateway PreparationIVR Interactive Voice Response Instructions Save SettingsSoftware Upgrades To inquire about current Gateway’s WAN Port IP addressIVR Functions Table Function Code Description Example Function Code Description Example Subnet Mask Settings Static IP Settings Function Command Select a Static IPIP address Settings Default Gateway SettingsRecorded Voice File Adsl PPPoE SettingsPPPoE Account Settings Select a PPPoEPPPoE Character Conversion Table Network Settings WAN InstructionsPage Setting Static IP IP Configuration Setting WAN PortSetting Dynamic IP Dhcp Adsl PPPoE SettingsDNS Settings BigPond for Australia use onlyClone MAC Using Phone Books Manager Network Settings LAN LAN interface mode※LAN IP/Subnet mask Dhcp Settings QoS Settings WAN QoSLAN QoS※ NAT/DDNS NAT TraversalDdns Example Telephony SettingsPrefix Number Rules For exampleHotline Functions Example Description SIP 164 System FXO Representative number registers to Proxy Each line registers to Proxy independentlyCalling Features Advanced Options Line Settings Fax Settings CodecPage Digit Map Phone Book Speed DialCDR Settings Caller FilterACL for Management Language Transit Call ControlLong-Distance Control Table Long Distance Exception TableUDT Detection CPT/Cadence SettingsBusy Tone Cadence Measurement CPT parameters TableDetailed description is given below Direct Connection to Pstn Connected to a PBX Extension Line Page Save Settings Filling in the CPT TableSystem Information RTP Packet Summary Stun InquiryPing Test Backup/Restore SnmpProvision Settings System Operations Save SettingsSoftware Upgrade LogoutIP Sharing Functions Select TCP/IP, and then click Properties Page Instruction Dialed Number Processing FlowEnd Static Route※ RIPRouting Information Protocol ※Port filtering IP FilteringMAC Filtering Virtual ServerURL Filter※ Special Applications※DoS Prevention Settings※