D-Link DVG-6008S user manual Network Settings LAN, LAN interface mode※, LAN IP/Subnet mask

Page 23

21

Network Settings (LAN)

LAN interface mode※

Router: The system serves as a router with NAT.

Bridge: The system serves as a bridge between WAN port and LAN port without NAT. (LAN default gateway will still be accessible for configuration).

LAN IP/Subnet mask

Gateway LAN Port IP address and the subnet mask value. Please note that Gateway is built with NAT: Gateway LAN Port IP address cannot be in the same section as the NAT LAN Port IP address, or else it is unable to make or receive calls. For example, if the NAT LAN Port IP address is 192.168.8.1, then Gateway LAN Port cannot be ranged between 192.168.8.1 ~ 192.168.8.254. If so, please change the LAN

Image 23

Contents DVG-6008S Voip Gateway Page Contents IP Sharing Functions Coding Principle Advanced FeatureProduct Overview IntroductionHardware Description Front Panel DVG-6008S Model Rear PanelGateway in a NAT network Network InterfaceGateway Assigned with a Public IP Address Page Integrating Line Ports with PBX Telephone Interface DescriptionIVR Interactive Voice Response Basic Settings of a GatewayPreparation To inquire about current Gateway’s WAN Port IP address Save SettingsSoftware Upgrades InstructionsIVR Functions Table Function Code Description Example Function Code Description Example Default Gateway Settings Static IP Settings Function Command Select a Static IPIP address Settings Subnet Mask SettingsSelect a PPPoE Adsl PPPoE SettingsPPPoE Account Settings Recorded Voice FilePPPoE Character Conversion Table Instructions Network Settings WANPage Adsl PPPoE Settings IP Configuration Setting WAN PortSetting Dynamic IP Dhcp Setting Static IPClone MAC DNS SettingsBigPond for Australia use only Using Phone Books Manager LAN IP/Subnet mask Network Settings LANLAN interface mode※ Dhcp Settings LAN QoS※ QoS SettingsWAN QoS NAT Traversal NAT/DDNSDdns For example Telephony SettingsPrefix Number Rules ExampleHotline Functions Example Description SIP 164 System Each line registers to Proxy independently FXO Representative number registers to ProxyCalling Features Advanced Options Line Settings Codec Fax SettingsPage Digit Map Speed Dial Phone BookACL for Management CDR SettingsCaller Filter Transit Call Control LanguageLong Distance Exception Table Long-Distance Control TableCPT parameters Table CPT/Cadence SettingsBusy Tone Cadence Measurement UDT DetectionDetailed description is given below Direct Connection to Pstn Connected to a PBX Extension Line Page Filling in the CPT Table Save SettingsSystem Information Ping Test RTP Packet SummaryStun Inquiry Snmp Backup/RestoreSystem Operations Save Settings Provision SettingsLogout Software UpgradeIP Sharing Functions Select TCP/IP, and then click Properties Page Dialed Number Processing Flow InstructionEnd RIPRouting Information Protocol ※ Static Route※IP Filtering Port filteringVirtual Server MAC FilteringSpecial Applications※ URL Filter※DoS Prevention Settings※