D-Link DVG-6008S user manual Network Settings WAN, Instructions

Page 18

4. Setting a Gateway with WEB Browser

The gateway allows users to make settings using a web browser. After opening a browser, enter Gateway’s IP address as the website address in order to enter the Web configuration screen as shown in the following diagram.

You can also enter ”101” from the handset to inquire about the current WAN Port IP address. The factory default LAN Port IP address is 192.168.8.254.

Instructions

Open an Internet browser.

Enter gateway’s WAN Port IP address in the website address area (If the PC is connected to the LAN Port, enter the LAN Port IP address. The default is 192.168.8.254)

The following registration screen will appear (The factory default settings for Login ID and Password are left blank).

Change the default settings of Administrator’s Name, Password and Web UI Login ID, Password in Advanced Options.

After completing and confirming the settings, some of the settings will take effect immediately. But network related settings would take effect after the gateway is restarted. Please go to System Operation to save the settings before restarting the system.

The gateway doesn’t allow multiple people to configure the gateway at same time. If a user logs into the system, other users from different IP addresses cannot login at the same time. Please remember to logout or restart the system if not using the web configuration function.

Network Settings (WAN)

The network settings are used to set the gateway’s communication ports, IP configurations, and Phone Books Manager IP etc.

Image 18

Contents DVG-6008S Voip Gateway Page Contents Advanced Feature IP Sharing Functions Coding PrincipleIntroduction Product OverviewHardware Description Front Panel Rear Panel DVG-6008S ModelNetwork Interface Gateway Assigned with a Public IP AddressGateway in a NAT network Page Telephone Interface Description Integrating Line Ports with PBXBasic Settings of a Gateway PreparationIVR Interactive Voice Response Instructions Save SettingsSoftware Upgrades To inquire about current Gateway’s WAN Port IP addressIVR Functions Table Function Code Description Example Function Code Description Example Subnet Mask Settings Static IP Settings Function Command Select a Static IPIP address Settings Default Gateway SettingsRecorded Voice File Adsl PPPoE SettingsPPPoE Account Settings Select a PPPoEPPPoE Character Conversion Table Network Settings WAN InstructionsPage Setting Static IP IP Configuration Setting WAN PortSetting Dynamic IP Dhcp Adsl PPPoE SettingsDNS Settings BigPond for Australia use onlyClone MAC Using Phone Books Manager Network Settings LAN LAN interface mode※LAN IP/Subnet mask Dhcp Settings QoS Settings WAN QoSLAN QoS※ NAT/DDNS NAT TraversalDdns Example Telephony SettingsPrefix Number Rules For exampleHotline Functions Example Description SIP 164 System FXO Representative number registers to Proxy Each line registers to Proxy independentlyCalling Features Advanced Options Line Settings Fax Settings CodecPage Digit Map Phone Book Speed DialCDR Settings Caller FilterACL for Management Language Transit Call ControlLong-Distance Control Table Long Distance Exception TableUDT Detection CPT/Cadence SettingsBusy Tone Cadence Measurement CPT parameters TableDetailed description is given below Direct Connection to Pstn Connected to a PBX Extension Line Page Save Settings Filling in the CPT TableSystem Information RTP Packet Summary Stun InquiryPing Test Backup/Restore SnmpProvision Settings System Operations Save SettingsSoftware Upgrade LogoutIP Sharing Functions Select TCP/IP, and then click Properties Page Instruction Dialed Number Processing FlowEnd Static Route※ RIPRouting Information Protocol ※Port filtering IP FilteringMAC Filtering Virtual ServerURL Filter※ Special Applications※DoS Prevention Settings※