NETGEAR CG3000Dv2 user manual Log In to Your Gateway,  To log in to the gateway

Page 10

NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway

Log In to Your Gateway

Log in to the gateway to view or change its settings.

Note: To connect to the gateway, use a computer configured for DHCP (most computers are). For help with configuring DHCP, see the instructions that came with your computer.

If you do not click Logout, when you have logged in, the gateway waits for activity for 5 minutes before it automatically logs you out.

To log in to the gateway:

1.On the computer that is connected to the gateway with an Ethernet cable, type http://192.168.0.1 in the address field of your Internet browser.

A login window displays.

2.Log in with the user name admin and the default password, password. When you connect to the gateway, the Modem Status screen displays.

Connecting to the Internet

10

Image 10

Contents August 2013 East Plumeria Drive San Jose, CA USARevision History Contents Appendix a Supplemental Information Connecting to the Internet Gateway Front Panel DescriptionSecurity, see the Use Push N Connect WPS Wireless Setup on Gateway Rear Panel Gateway rear panelWireless Performance and Gateway Location LabelLog In to Your Gateway  To log in to the gatewayView Basic Settings  To view or configure basic settingsConfiguring Your Wireless Network Set Up Your Wireless Network  To view or configure the wireless settingsNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Use Push N Connect WPS Wireless Setup Netgear Docsis 3.0 N450 Wi-Fi Data Gateway Add a Client Using a PIN  To add a wireless device to your gateway using a PINSet Up Wi-Fi Multimedia  To set up Wi-Fi MultimediaChange the Password  To change the passwordPage Filtering Content View Denial of Service DoS Attack Logs  To receive notification of attacks by email To block access to sites containing certain words Limit Internet Site AccessClick Remove Keyword  To block access to certain domains Allow Unrestricted Access Disable Gateway Features To disable specific NAT ALG Status features  To disable specific web featuresFeature Description Netgear Docsis 3.0 N450 Wi-Fi Data Gateway Maintaining Your Network  To view the gateway status View the Gateway StatusModem field Description  To view the gateway’s initialization procedure Back Up and Restore Your SettingsView the Connection Status  To restore the backup settings  To back up the settingsView the Event Log  To view the event log Run the Diagnostic Utilities To run a ping test Click Start Test Traceroute Utility  To run a traceroute testAdvanced Settings  To configure advanced wireless settings Advanced Wireless SettingsAdvanced Wireless Settings Description MAC Filtering  To stop blocking a computer  To remove a computer from the listIP Filtering  To set up IP filtering To delete a device from the IP Filter List Port Blocking  To configure port blockingPort Forwarding Netgear Docsis 3.0 N450 Wi-Fi Data Gateway  To configure port triggering Port TriggeringDMZ Host  To set up a DMZ hostSelect the Respond to Ping on WAN Port check box LAN IP Setup  To configure LAN IP settings To reserve an IP address for Dhcp LAN SwitchReserve an IP Address for Dhcp Use Click Delete To disable a LAN port Configure Universal Plug and Play UPnP To configure the switch ports  To configure UPnP To enable NTP Set Networking ProtocolsRemove USB Devices Enable Network Address Translation To disable NAT  To remove a USB deviceTroubleshooting See Troubleshoot a TCP/IP Network Using a Ping Utility onConnect to the Gateway’s Main Menu Basic FunctionsLED Behavior Action Troubleshoot a TCP/IP Network Using a Ping Utility Troubleshoot the ISP ConnectionTest the LAN Path to Your Gateway PingNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Supplemental Information Factory Default Settings Feature Parameter DefaultTechnical Specifications Component SpecificationNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Notification of Compliance Regulatory Compliance InformationFCC Caution Avertissement