NETGEAR CG3000Dv2 user manual Reserve an IP Address for Dhcp Use, LAN Switch, Click Delete

Page 44

NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway

•DHCP Lease. For more information, see the following section, Reserve an IP Address for DHCP Use .

3.Click Apply.

Reserve an IP Address for DHCP Use

To reserve an IP address for DHCP use, enter the DHCP server reservation settings for the private LAN under DHCP Reservation Lease Info in the LAN IP screen.

To reserve an IP address for DHCP:

1.In the main menu, under Advanced, select LAN IP.

2.In the DHCP Reservation Lease Info section, enter the MAC address of the computer for which you want to reserve an IP address.

3.Enter the permanent IP address for the computer.

4.Click Add to save your settings.

The MAC address and IP address are displayed in the DHCP Client Lease Info table. The current system time is also displayed.

To delete an IP address from the DHCP Client Lease Info table:

1.In the DHCP Client Lease Info table, select the radio button for the MAC and IP address that you want to remove.

2.Click Delete.

The information for the selected MAC and IP address is removed from the DHCP Client Lease Info table.

To remove all information from the DHCP Client Lease Info table, click Clear DHCP Leases.

LAN Switch

The gateway’s LAN interference is a 10/100/1GBASE-T Ethernet switch. The switch ports are set to automatically negotiate speed and duplex communication with any connected device. You might want to configure the port if the devices do not auto-negotiate correctly.

Advanced Settings

44

Image 44

Contents August 2013 East Plumeria Drive San Jose, CA USARevision History Contents Appendix a Supplemental Information Connecting to the Internet Gateway Front Panel DescriptionSecurity, see the Use Push N Connect WPS Wireless Setup on Gateway Rear Panel Gateway rear panelWireless Performance and Gateway Location LabelLog In to Your Gateway  To log in to the gatewayView Basic Settings  To view or configure basic settingsConfiguring Your Wireless Network Set Up Your Wireless Network  To view or configure the wireless settingsNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Use Push N Connect WPS Wireless Setup Netgear Docsis 3.0 N450 Wi-Fi Data Gateway Add a Client Using a PIN  To add a wireless device to your gateway using a PINSet Up Wi-Fi Multimedia  To set up Wi-Fi MultimediaChange the Password  To change the passwordPage Filtering Content View Denial of Service DoS Attack Logs  To receive notification of attacks by emailClick Remove Keyword  To block access to certain domains Limit Internet Site Access To block access to sites containing certain words Allow Unrestricted Access Disable Gateway FeaturesFeature Description  To disable specific web features To disable specific NAT ALG Status features Netgear Docsis 3.0 N450 Wi-Fi Data Gateway Maintaining Your Network Modem field Description View the Gateway Status To view the gateway status View the Connection Status Back Up and Restore Your Settings To view the gateway’s initialization procedure View the Event Log  To back up the settings To restore the backup settings  To run a ping test Run the Diagnostic Utilities To view the event log Click Start Test Traceroute Utility  To run a traceroute testAdvanced Settings Advanced Wireless Settings Description Advanced Wireless Settings To configure advanced wireless settings MAC Filtering  To stop blocking a computer  To remove a computer from the list To delete a device from the IP Filter List  To set up IP filteringIP Filtering Port Forwarding  To configure port blockingPort Blocking Netgear Docsis 3.0 N450 Wi-Fi Data Gateway  To configure port triggering Port TriggeringSelect the Respond to Ping on WAN Port check box  To set up a DMZ hostDMZ Host LAN IP Setup  To configure LAN IP settingsLAN Switch Reserve an IP Address for Dhcp Use To reserve an IP address for Dhcp Click DeleteConfigure Universal Plug and Play UPnP  To configure the switch ports To disable a LAN port  To configure UPnP To enable NTP Set Networking ProtocolsEnable Network Address Translation  To disable NATRemove USB Devices  To remove a USB deviceTroubleshooting See Troubleshoot a TCP/IP Network Using a Ping Utility onLED Behavior Action Basic FunctionsConnect to the Gateway’s Main Menu Troubleshoot a TCP/IP Network Using a Ping Utility Troubleshoot the ISP ConnectionTest the LAN Path to Your Gateway PingNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Supplemental Information Factory Default Settings Feature Parameter DefaultTechnical Specifications Component SpecificationNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Notification of Compliance Regulatory Compliance InformationFCC Caution Avertissement