NETGEAR CG3000Dv2 user manual Use Push N Connect WPS Wireless Setup

Page 15

NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway

Note: If you plan to use WPS, and you want to keep your wireless settings the same, go to the Advance Wireless Settings screen and make sure that the Keep Existing Settings check box is selected. See

Advanced Wireless Settings on page 35.

Use Push 'N' Connect (WPS) Wireless Setup

Push 'N' Connect (WPS) can be a quick way to automatically set up your gateway’s wireless network and set up your wireless computer to connect to it at the same time. WPS, also called Wi-Fi Protected Setup, is relatively new technology, so before you decide to use it, check to make sure your wireless computers and devices support WPS. Look for the

symbol on all the computers that connect wirelessly to the gateway.

If you do not see the symbol on all the computers that connect to the wireless network, then you should manually set up your network first (see Configure Wireless Settings Manually on page 13). After that, you can still use WPS to set up the wireless connection for the computers that support WPS.

Note: All WPS-capable products should be compatible with the gateway. For more information about the WPS standard, visit

http://www.wi-fi.org).

Two Push 'N' Connect methods are available, WPS button and PIN (personal identification number).

Add a Client Using the WPS Button

Note: The first time you use WPS, it assigns a random network name (SSID) and a random password to your wireless network. If you want to keep the network name and password you specified in the Wireless Settings screen, you must select the Keep Existing Settings check box in the Advanced Wireless Settings screen. See

Advanced Wireless Settings on page 35.

Any computer or wireless device that connects wirelessly to the gateway is a client. After a device is added as a client, it can automatically connect to the gateway.

To add a wireless device to your gateway using the WPS button:

1. Make sure that you know how WPS works on your computer or wireless device.

Configuring Your Wireless Network

15

Image 15
Contents USA August 2013 East Plumeria Drive San Jose, CARevision History Contents Appendix a Supplemental Information Connecting to the Internet Description Gateway Front PanelSecurity, see the Use Push N Connect WPS Wireless Setup on Gateway rear panel Gateway Rear PanelLabel Wireless Performance and Gateway Location To log in to the gateway Log In to Your Gateway To view or configure basic settings View Basic SettingsConfiguring Your Wireless Network  To view or configure the wireless settings Set Up Your Wireless NetworkNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Use Push N Connect WPS Wireless Setup Netgear Docsis 3.0 N450 Wi-Fi Data Gateway  To add a wireless device to your gateway using a PIN Add a Client Using a PIN To set up Wi-Fi Multimedia Set Up Wi-Fi Multimedia To change the password Change the PasswordPage Filtering Content  To receive notification of attacks by email View Denial of Service DoS Attack LogsLimit Internet Site Access  To block access to sites containing certain wordsClick Remove Keyword  To block access to certain domains Disable Gateway Features Allow Unrestricted Access To disable specific web features  To disable specific NAT ALG Status featuresFeature Description Netgear Docsis 3.0 N450 Wi-Fi Data Gateway Maintaining Your Network View the Gateway Status  To view the gateway statusModem field Description Back Up and Restore Your Settings  To view the gateway’s initialization procedureView the Connection Status  To back up the settings  To restore the backup settingsView the Event Log Run the Diagnostic Utilities  To view the event log To run a ping test Click Start Test  To run a traceroute test Traceroute UtilityAdvanced Settings Advanced Wireless Settings  To configure advanced wireless settingsAdvanced Wireless Settings Description MAC Filtering  To remove a computer from the list  To stop blocking a computer To set up IP filtering IP Filtering To delete a device from the IP Filter List  To configure port blocking Port BlockingPort Forwarding Netgear Docsis 3.0 N450 Wi-Fi Data Gateway Port Triggering  To configure port triggering To set up a DMZ host DMZ HostSelect the Respond to Ping on WAN Port check box  To configure LAN IP settings LAN IP SetupClick Delete LAN SwitchReserve an IP Address for Dhcp Use  To reserve an IP address for Dhcp To configure UPnP Configure Universal Plug and Play UPnP To configure the switch ports  To disable a LAN portSet Networking Protocols  To enable NTP To remove a USB device Enable Network Address Translation To disable NAT Remove USB DevicesSee Troubleshoot a TCP/IP Network Using a Ping Utility on TroubleshootingBasic Functions Connect to the Gateway’s Main MenuLED Behavior Action Troubleshoot the ISP Connection Troubleshoot a TCP/IP Network Using a Ping UtilityPing Test the LAN Path to Your GatewayNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Supplemental Information Feature Parameter Default Factory Default SettingsComponent Specification Technical SpecificationsNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Regulatory Compliance Information Notification of ComplianceFCC Caution Avertissement