NETGEAR CG3000Dv2 user manual Security, see the Use Push N Connect WPS Wireless Setup on

NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway

LED	Description (continued)
	• Blue. More than one upstream channel is locked.
	• Solid. One upstream channel is locked.
Upstream	• Blinking green. The unit is ranging on the upstream.
	• Off. No downstream channel is locked.
	• Solid green. The cable modem is online.
	• Slow blink. The cable modem is receiving DHCP information.
Internet	• Fast blink. The cable modem is downloading the configuration file.
	• Off. The cable modem is offline.
	Green indicates 1,000 Mbps. Amber indicates 100/10 Mbps.
LAN (Ethernet)	• Solid. An Ethernet device is connected and powered on.
	• Blinking. Data is being transmitted or received on the Ethernet port.
	• Off. No Ethernet device is detected on the Ethernet port.
	• Solid green. The wireless card is plugged in and enabled.
	• Blinking. There is traffic on the wireless card.
Wireless	• Off. The wireless card is either disabled or not plugged in.
	To enable or disable the card, press this button for 3 seconds.
On/Off
	Pressing this button opens a 2-minute window for the gateway to connect with other
	WPS-enabled devices. For more information, about using the WPS method to implement
	security, see the Use Push 'N' Connect (WPS) Wireless Setup on page 15.
WPS

Connecting to the Internet

7