NETGEAR CG3000Dv2 user manual  To stop blocking a computer,  To remove a computer from the list

Page 37

NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway

Time of Day to Block. You can specify the time of day to block the computer. The default is All Day. Be sure that you clear the All Day check box if you want to enter specific times. The selected period applies to each day that you selected.

5.Click Apply.

6.Repeat these steps for all computers that you want to block.

To stop blocking a computer:

1.In the MAC Filter List, select the computer.

2.Clear its Enable check box.

The computer remains in the list; however, it is not blocked.

3.Click Apply.

To remove a computer from the list:

1.In the MAC Filter List, select the computer.

2.Click Delete.

3.Click Apply.

Advanced Settings

37

Image 37
Contents USA August 2013 East Plumeria Drive San Jose, CARevision History Contents Appendix a Supplemental Information Connecting to the Internet Description Gateway Front PanelSecurity, see the Use Push N Connect WPS Wireless Setup on Gateway rear panel Gateway Rear PanelLabel Wireless Performance and Gateway Location To log in to the gateway Log In to Your Gateway To view or configure basic settings View Basic SettingsConfiguring Your Wireless Network  To view or configure the wireless settings Set Up Your Wireless NetworkNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Use Push N Connect WPS Wireless Setup Netgear Docsis 3.0 N450 Wi-Fi Data Gateway  To add a wireless device to your gateway using a PIN Add a Client Using a PIN To set up Wi-Fi Multimedia Set Up Wi-Fi Multimedia To change the password Change the PasswordPage Filtering Content  To receive notification of attacks by email View Denial of Service DoS Attack Logs To block access to sites containing certain words Limit Internet Site AccessClick Remove Keyword  To block access to certain domains Disable Gateway Features Allow Unrestricted Access To disable specific NAT ALG Status features  To disable specific web featuresFeature Description Netgear Docsis 3.0 N450 Wi-Fi Data Gateway Maintaining Your Network  To view the gateway status View the Gateway StatusModem field Description  To view the gateway’s initialization procedure Back Up and Restore Your SettingsView the Connection Status  To restore the backup settings  To back up the settingsView the Event Log  To view the event log Run the Diagnostic Utilities To run a ping test Click Start Test  To run a traceroute test Traceroute Utility Advanced Settings  To configure advanced wireless settings Advanced Wireless SettingsAdvanced Wireless Settings Description MAC Filtering  To remove a computer from the list  To stop blocking a computerIP Filtering  To set up IP filtering To delete a device from the IP Filter List Port Blocking  To configure port blockingPort Forwarding Netgear Docsis 3.0 N450 Wi-Fi Data Gateway Port Triggering  To configure port triggeringDMZ Host  To set up a DMZ hostSelect the Respond to Ping on WAN Port check box  To configure LAN IP settings LAN IP SetupReserve an IP Address for Dhcp Use LAN Switch To reserve an IP address for Dhcp Click Delete To configure the switch ports Configure Universal Plug and Play UPnP To disable a LAN port  To configure UPnPSet Networking Protocols  To enable NTP To disable NAT Enable Network Address TranslationRemove USB Devices  To remove a USB deviceSee Troubleshoot a TCP/IP Network Using a Ping Utility on TroubleshootingConnect to the Gateway’s Main Menu Basic FunctionsLED Behavior Action Troubleshoot the ISP Connection Troubleshoot a TCP/IP Network Using a Ping UtilityPing Test the LAN Path to Your GatewayNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Supplemental Information Feature Parameter Default Factory Default SettingsComponent Specification Technical SpecificationsNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Regulatory Compliance Information Notification of ComplianceFCC Caution Avertissement