NETGEAR CG3000Dv2 Run the Diagnostic Utilities,  To view the event log,  To run a ping test

Page 31

NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway

To view the event log:

1. In the main menu, under Maintenance, select Event Log.

2.Do either of the following:

•To clear the log, click Clear Log.

•To refresh the log, click Refresh.

Run the Diagnostic Utilities

From the Diagnostics screen, you can run ping and traceroute utilities.

Ping Utility

Ping is an administration utility that tests whether a computer on the network is reachable and measures the time it takes messages sent from the originating device to reach a destination computer and return.

To run a ping test:

1.Log in to the gateway.

For more information, see Log In to Your Gateway on page 10.

2.In the main menu, under Maintenance, select Diagnostics.

Maintaining Your Network

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents USA August 2013 East Plumeria Drive San Jose, CARevision History Contents Appendix a Supplemental Information Connecting to the Internet Description Gateway Front PanelSecurity, see the Use Push N Connect WPS Wireless Setup on Gateway rear panel Gateway Rear PanelLabel Wireless Performance and Gateway Location To log in to the gateway Log In to Your Gateway To view or configure basic settings View Basic SettingsConfiguring Your Wireless Network  To view or configure the wireless settings Set Up Your Wireless NetworkNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Use Push N Connect WPS Wireless Setup Netgear Docsis 3.0 N450 Wi-Fi Data Gateway  To add a wireless device to your gateway using a PIN Add a Client Using a PIN To set up Wi-Fi Multimedia Set Up Wi-Fi Multimedia To change the password Change the PasswordPage Filtering Content  To receive notification of attacks by email View Denial of Service DoS Attack Logs To block access to sites containing certain words Limit Internet Site AccessClick Remove Keyword  To block access to certain domains Disable Gateway Features Allow Unrestricted Access To disable specific NAT ALG Status features  To disable specific web featuresFeature Description Netgear Docsis 3.0 N450 Wi-Fi Data Gateway Maintaining Your Network  To view the gateway status View the Gateway Status Modem field Description  To view the gateway’s initialization procedure Back Up and Restore Your SettingsView the Connection Status  To restore the backup settings  To back up the settingsView the Event Log  To view the event log Run the Diagnostic Utilities To run a ping test Click Start Test  To run a traceroute test Traceroute UtilityAdvanced Settings  To configure advanced wireless settings Advanced Wireless SettingsAdvanced Wireless Settings Description MAC Filtering  To remove a computer from the list  To stop blocking a computerIP Filtering  To set up IP filtering To delete a device from the IP Filter List Port Blocking  To configure port blockingPort Forwarding Netgear Docsis 3.0 N450 Wi-Fi Data Gateway Port Triggering  To configure port triggeringDMZ Host  To set up a DMZ hostSelect the Respond to Ping on WAN Port check box  To configure LAN IP settings LAN IP SetupClick Delete LAN SwitchReserve an IP Address for Dhcp Use  To reserve an IP address for Dhcp To configure UPnP Configure Universal Plug and Play UPnP To configure the switch ports  To disable a LAN portSet Networking Protocols  To enable NTP To remove a USB device Enable Network Address Translation To disable NAT Remove USB DevicesSee Troubleshoot a TCP/IP Network Using a Ping Utility on TroubleshootingConnect to the Gateway’s Main Menu Basic FunctionsLED Behavior Action Troubleshoot the ISP Connection Troubleshoot a TCP/IP Network Using a Ping UtilityPing Test the LAN Path to Your GatewayNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Supplemental Information Feature Parameter Default Factory Default SettingsComponent Specification Technical SpecificationsNetgear Docsis 3.0 N450 Wi-Fi Data Gateway Regulatory Compliance Information Notification of ComplianceFCC Caution Avertissement
Top Page Image Contents