
NETGEAR DOCSIS 3.0 N450 Wi-Fi  Data Gateway
Factory Default Settings
You can return the gateway to its factory settings. On the rear panel of the gateway, press and hold the Reset button for over 7 seconds. The gateway resets and returns to the factory configuration settings shown in the following table.
Table 2. Factory default settings
| Feature | Parameter | Default | |
| Gateway login | User login URL | http://192.168.0.1 | |
| 
 | 
 | 
 | |
| 
 | User name and password | admin/password | |
| 
 | 
 | ||
| 
 | 
 | 
 | |
| Local network | LAN IP | 192.168.0.1 | |
| (LAN) | 
 | 
 | |
| Subnet mask | 255.255.255.0 | ||
| 
 | |||
| 
 | 
 | 
 | |
| 
 | DHCP server | Enabled | |
| 
 | 
 | 
 | |
| 
 | DHCP starting IP address | 192.168.0.2 | |
| 
 | 
 | 
 | |
| 
 | DHCP Ending IP address | 192.168.0.254 | |
| 
 | 
 | 
 | |
| Firewall | Inbound communication from the | Disabled (except traffic on port 80, the HTTP port) | |
| 
 | Internet | 
 | |
| 
 | 
 | 
 | |
| 
 | Outbound communication to the | Enabled (all) | |
| 
 | Internet | 
 | |
| 
 | 
 | 
 | |
| 
 | Source MAC filtering | Disabled | |
| 
 | 
 | 
 | |
| Internet | WAN MAC address | Use default hardware address. | |
| connection | 
 | 
 | |
| WAN MTU size | 1500 | ||
| 
 | |||
| 
 | 
 | 
 | 
Supplemental Information
54