NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
When the computer connects to the wireless network, the gateway sends its SSID and
8.On the computer that just joined the wireless network, make sure you can connect to the Internet.
You should see the gateway’s Internet LED blink, showing that the Internet connection is in use.
Add a Client Using a PIN
Any computer or wireless device that connects wirelessly to the gateway is a client. After a device is added as a client, it can automatically connect to the gateway.
To add a wireless device to your gateway using a PIN:
1.Make sure that you know how WPS works on your computer or wireless device.
If it works with WPS, it has a WPS utility. To determine the PIN for your wireless computer or device, use this utility.
2.Log in to the gateway.
For more information, see Log In to Your Gateway on page 10.
3.In the main menu, select Add WPS Client. The following screen displays.
4.Click Next.
The Add WPS Client screen displays.
5.Select the PIN radio button.
6.In the Enter Client’s PIN field, type the PIN that you located in Step 1.
7.Click Next.
Configuring Your Wireless Network
17