3Com 4210G manual Dual-Port 10 GE SFP+ Interface Module, Transceiver Central Max

insert an XFP transceiver into the port to connect it to another XFP port through an optical fiber. You can select the XFP transceivers list in Table 1-17 as required.

Dual-Port 10 GE SFP+ Interface Module

Figure 1-20Dual-port 10 GE SFP+ interface module

Figure 1-21Front panel of dual-port 10 GE SFP+ interface module

A dual-port 10 GE SFP+ interface module provides two 10 Gbps SFP+ ports. You can insert an SFP+ transceiver into the port to connect it to another SFP+ port through an optical fiber, or an SFP+ cable provided by H3C. For details about the supported SFP+ transceivers and SFP+ cables, refer to Table 1-18.

Table 1-18SFP+ transceivers and SFP+ cables supported by dual-port 10 GE SFP+ interface module

Transceiver	Transceiver/	Central					Max
		waveleng		Connector	Fiber		transmission
/Cable type	Cable
		th					distance
	SFP-XG-SX-	850 nm			50/125 µm multimode		300 m (984.25
	MM850-A				optical fiber		ft.)
10 GE SFP+
	SFP-XG-LX2		LC		62.5/125 µm		220 m (721.78
transceiver	20-MM1310				multimode optical fiber		ft.)
		1310 nm
	SFP-XG-LX-				9/125 µm single mode	10 km (6.21 mi)
	SM1310				optical fiber
	LSWM1STK					0.65 m (2.13 ft.)
Short-haul
	LSWM2STK						1.2 m (3.94 ft.)
10 GE SFP+		—		—	SFP+ cable
	LSWM3STK						3 m (9.84 ft.)
cable
	LSWM4STK					10 m (32.81 ft.)

1-18