3Com 4210G manual 2Properties dialog box

4)Change the rate of the serial port on the terminal

To ensure communication between the terminal and the switch, the baud rate of the serial port on the terminal should be consistent with that of the console port on the switch.

Step1 Select Call > Disconnect in the HyperTerminal window to disconnect the terminal from the switch.

Figure 5-1Disconnect the terminal from the switch

Step2 Select File > Properties. In the Properties dialog box, click Configure (as shown in Figure 5-2), and then select 115200 from the Bits per second drop-down list box (as shown in Figure 5-3).

Figure 5-2Properties dialog box

5-5