3Com 4210G manual 4Set the serial port used by the HyperTerminal connection

z

z

z

z

z

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

Emulation: VT100

The specific procedure is as follows:

Step1 Select Start > Programs > Accessories > Communications > HyperTerminal to enter the HyperTerminal window. The Connection Description dialog box appears, as shown below.

Figure 4-3Connection description of the HyperTerminal

Step2 Type the name of the new connection in the Name text box and click OK. The following dialog box appears. Select the serial port to be used from the Connect using drop-down list.

Figure 4-4Set the serial port used by the HyperTerminal connection

4-3